RuggedMC RMC40 Installation Guide RuggedCom Inc. 30 Whitmore Road Woodbridge, Ontario Canada L4L 7Z4 Web: http://www.ruggedcom.
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Table of Contents 1 2 3 4 5 Product Overview .................................................................................................................... 4 1.1 Functional Overview ....................................................................................................... 4 1.2 Feature Highlights........................................................................................................... 4 1.3 RuggedMCTM Front Panel Description ..........................................
1 Product Overview 1.1 Functional Overview The Rugged MediaConverterTM is an industrially hardened fiber optical media converter specifically designed to operate in harsh environments such as those found in electric utility substations and factory floors. The RMC40TM provides industrial strength Ethernet copper-to-fiber media conversion, providing copper-based 10BaseT or 100BaseTx clients 100BaseFX fiber optical connectivity.
1.3 RuggedMCTM Front Panel Description Fig. 1.3.1 RuggedMCTM Front Panel Detail (Dual LC Style 100BaseFX fiber optic connector shown) ITEM RJ45: Lk/Act RJ45: 100 Fiber: Lk/Act Power LED Activity Solid (Yellow) Blinking (Yellow) Solid (Yellow) Off Solid (Yellow) Blinking (Yellow) Solid (Green) Comments Link Established Tx, Rx Activity 100Mbps Operation 10Mbps Operation Link Established Tx, Rx Activity Power On 5 2006 RuggedCom Inc.
1.4 RuggedMCTM Side and Bottom View Fig. 1.4.1 RuggedMCTM Side and Bottom View 6 2006 RuggedCom Inc.
2 Installation 2.1 DIN Rail Mounting Fig. 2.1.1 RuggedMCTM DIN Rail Mounting 7 2006 RuggedCom Inc.
2.2 Panel Mounting With the use of an optional panel-mount adapter, the RuggeMCTM series of media converters can be panel mounted. The drawing shown in Figure 2.2.1 shows an example of an RMC unit panel mounted using the optional panel mount adapter. The panel mount adapter can be secured to a panel with three screws. The RuggedMCTM product is easily mounted onto the panel mount adapter via the two metal clips on either side of the unit, and a single screw located on the bottom. Figure 2.2.
2.3 Power Supply Wiring and Grounding Fig. 2.2.1 RuggedMCTM Power Supply Inputs The RuggedMCTM power supply inputs are identical and are connected as follows: 1. +/L = DC (+) / AC (Hot) is connected to the positive (+) terminal if the power source is DC or to the (Hot) terminal if the power source is AC. 2. -/N = DC (-) / AC (Neutral) is connected to the negative (-) terminal if the power source is DC or to the (Neutral) terminal if the power source is AC. 3.
2.4 RJ45 Ports – Signal Description The RJ45 port accepts standard category 5 unshielded twisted pair (UTP), or screened twisted pair (STP) cable with RJ45 male connectors. Fig. 2.3.1 shows the RJ45 port pin configuration. Both RJ45 Ethernet ports on the RMC40TM are auto-crossover, auto-polarity, auto-crossover (MDI / MDIX) equipped, for simple plug-and-play operation.
3 Specifications 3.1 Power Supply Specifications Power Supply Type 24 VDC 48 VDC HI (88/300 VDC) 1 HI (120/240 VAC) 1 Minimum Input 18 VDC 36 VDC 88 VDC 85 VAC Maximum Input 36 VDC 72 VDC 300 VDC 264 VAC Fuse Rating 3.15A(T) 2 3.15A(T) 2 3.15A(T) 2 Maximum Power Consumption 3W Notes: 1 – This is the same power supply for both AC and DC. 2 – (T) Denotes time-delay fuse CAUTION: For continued protection against risk of fire, replace only with same type and rating of fuse. 3.
3.3 Fiber Optical Port Specifications Mode / Connector Tx λ (nm) Cable Type2 (µm) Tx Pwr (dBm peak) 3 (Min / Max) Rx Sensitivity (dBm Average) 3 Rx Saturation (dBm Peak) 3 Typical Distance (km) 1 Power Budget (dB) 100BaseFX MM / ST 1310 50/125 -15.7 -33.5 -11 2 17 100BaseFX MM / SC 1310 50/125 -16/-11 -33 -11 2 17 100BaseFX MM / LC 1310 50/125 -19 / -14 -32 -14 2 15 100BaseFX MM / MTRJ 1310 50/125 -16/-11 -33.
3.5 Operational Specifications Parameter Conversion Type Mac Address Table Length Frame Buffer Memory Specification Cut-Through 2048 1Mbit Notes High-speed, non-blocking 13 2006 RuggedCom Inc.
3.6 Mechanical Specifications Parameter Dimensions Weight Enclosure Value 4.30 x 2.40 x 3.30 inches Comments (Length x Width x Height) (110) x (61) x (84) mm 1.5 lb (0,68 Kg) 18 gauge Galvanized Steel 14 2006 RuggedCom Inc.
4 Type Test Specifications Electrical Safety Dielectric Withstand Levels 2 kV rms for 1 minute High Voltage Impulse Insulation Resistance 5 kV peak 500 VDC for 1 minute Electrical Environment High Frequency Disturbance (Oscillatory) Levels Comments ANSI/IEEE C37.
4.1 Operating Environment Parameter Range Ambient Operating Temperature -40 to 85°C Ambient Relative Humidity Ambient Storage Temperature 5% to 95% Comments Ambient Temperature as measured from a 30cm radius surrounding the center of the RuggedMCTM enclosure. Non-condensing -40 to 85°C 4.2 Agency Approvals Agency CSA, CE FCC CISPR FDA/CDRH IEC/EN Standards CSA C22.2 No.
