User's Manual

2
0
Getting Started
F
4. Take the micro SIM card from its packaging.
5. Push the SIM card cover to open and place the micro SIM card to the slot.
6. Close the SIM card cover.
Figure 15. Installing the Micro SIM Card
7. Install the 4G LTE card and its antennas to the slot and close the service door.
Using the Digitizer
Following the information below when using a digitizer:
■ Use only the included digitizer to touch the screen. Do not place any objects on its surface
and do not press down strongly with sharp-pointed or hard objects that may leave marks
(e.g., nails, pencils and ball point pens).
■ Use the digitizer only for touching the screen. Using it for any other purpose may damage the
digitizer and result in scratches on the screen.
■ The digitizer uses electromagnetic induction and may not work properly near strong electrical
field or magnetic field such as:
■ Near AM radio base stations or relay station antennas
■ Near CRT displays that generate strong electromagnetic field noise
Move the digitizer away from such locations so it works properly.
■ The pointer cannot follow the digitizer movement if you move the digitizer too quickly.
To make a selection, tap the screen once with the digitizer. To double-click, tap twice without
pausing. To do a right-click, tap the screen once and hold the tip of the digitizer on the screen, the
right-click icon appears. Press the click button is the same as a right click.