User's Manual

39
Using BIOS Setup Utility
4. Verification of the password is required. Tap the same password again and tap Enter to
confirm the new password.
5. Navigate to APP Menu > Exit.
Figure 57. Exit Screen
6. Tap Exit Saving Changes to display the confirmation screen.
7. Tap Yes to save the new configuration settings.
After setting the Supervisor password, the password is required to access the BIOS Setup Utility.
Changing a Supervisor Password
1. Navigate to APP Menu > Security > Account’s Password Status.
2. Tap the Enter icon next to Setup Supervisor Password.
3. Enter the current supervisor password.
4. Enter a new password.
5. Enter the new password again to confirm.
6. Go to APP Menu > Exit.
7. Tap Exit Saving Changes and tap Yes to save the configuration.
Resetting a Supervisor Password
A supervisor password can not be reset. In the event that you forget the supervisory password,
you will need to reflash the BIOS to enter the BIOS menus. Refer to “Updating BIOS” on page
43 to reflash the BIOS.