User's Manual

1
9
Getting Started
2. Connect the AC adapter to the DC-IN port.
Figure 10. Connecting the AC Adapter
After charging the battery, disconnect the AC adapter and close the DC-IN cover.
1. Insert one end of the cover first and angle the cover to seat it in place.
2. Push in the cover to seal the DC-IN compartment.
Figure 11. Closing the DC-IN Cover
The DC-IN cover must be inserted correctly to prevent internal damage to the device.
Powering the Device On and Off
Powering On the Device
Only power on the PA-501 after connecting all of the peripherals and cabling.
1. Press and hold the power button until the screen lights. The device runs through the start up
sequence and powers up.
Figure 12. Power On the PA-501