User's Manual

32
Operation
Installing the Standard Battery
The following instructions are for both standard and external batteries. The external battery is an
optional component. Only use components specifically designed for this device. Contact your local
representative for ordering information.
Make sure the power switch is switched to ON before installing the standard/external
battery. See “First Time Use” on page 18.
1. Place the device display side down on a clean work surface.
2. Locate the battery.
Locking Switch
Release Button
Battery
Figure 41. Rear View: Locating the Battery
3. Align the tabs on the battery with the slots on the chassis.
4. Angle the battery in place and set the tabs in the chassis slots.
5. Lower the raised end of the battery and press in place until an audible click is heard.
Figure 42. Installing the Battery