Manualshelf

User's Manual

ManualsBrandsRuggON ManualsComputers & AccessoriesRugged Tablet
21222324252627282930
15
Getting Started
2.
Connect the AC adapter to the DC-IN port.
Connecting the AC Adapter
After charging the battery, disconnect the AC adapte
r and close the DC-IN cover.
1.
Insert one end of the cover first and angle the cover to seat it in place.
2.
Push in the cover to seal the DC-IN compartment.
Closing the DC-IN Cover
The DC-IN cover must be inserted correctly to prevent internal damage to the device.
Powering the Device On and Off
Powering On the Device
Only power on the PA501 after connecting all of the peripherals and cabling.
1.
Press and hold the power button until the screen lights. The device runs through the start up
sequence and powers up.
Power On the PA501