User's Manual
![](/manual/ruggon/pm311b/user-s-manual-english/images/img-12.png)
57
Using BIOS Setup Utility
4. Verication of the password is required. Tap the same password again and tap Enter to
conrm the new password.
5. Navigate to APP Menu > Exit.
Figure 85. Exit Screen
6. Tap Exit Saving Changes to display the conrmation screen.
7. Tap Yes to save the new conguration settings.
After setting the Supervisor password, the password is required to access the BIOS Setup Utility.
Changing a Supervisor Password
1. Navigate to APP Menu > Security > Account’s Password Status.
2. Tap the Enter icon next to Setup Supervisor Password.
3. Enter the current supervisor password.
4. Enter a new password.
5. Enter the new password again to conrm.
6. Go to APP Menu > Exit.
7. Tap Exit Saving Changes and tap Yes to save the conguration.
Resetting a Supervisor Password
A supervisor password can not be reset. In the event that you forget the supervisory password,
you will need to reash the BIOS to enter the BIOS menus. Refer to “Updating BIOS” on page
58 to reash the BIOS.