Instruction Manual

ManualsBrandsRUKKET ManualsKickball SetRUKKET B07ZQQ1DDB Glow in the Dark Kickball Set

Please call us if you have any questions or concerns at 1-855-4RUKKET

Please read our product safety warnings before setup

GLOW IN THE DARK KICKBALL SET

assembly INSTRUCTIONS

Transparent Pitcher Plate

Air Needles

Air Pump

Glow in the Dark Kickball

Transparent Square Plate

Transparent Home Plate

White Glow Stick with Hook

Green Glow Stick x100 pcs.

Connectors for Glow Stick x100 pcs.

Mesh Bag

Summary of content (4 pages)

PAGE 1
GLOW IN THE DARK KICKBALL SET assembly INSTRUCTIONS Please call us if you have any questions or concerns at 1-855-4RUKKET Please read our product safety warnings before setup A. Transparent Pitcher Plate B. Air Needles C. Air Pump D. Glow in the Dark Kickball E. Transparent Square Plate F. Transparent Home Plate G. White Glow Stick with Hook H. Green Glow Stick x100 pcs. I. Connectors for Glow Stick x100 pcs. J.
PAGE 2
GLOW IN THE DARK KICKBALL SET assembly INSTRUCTIONS HOME PLATE ASSEMBLY 1. Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up. 2. Lay the base ﬂat on the ground with the clips facing up. Take one of the sticks and slide it diagonally into the clips. 3. Take the second glow stick and slide it into the other two clips. This stick will sit on top of the stick attached in Step #2. 4.
PAGE 3
GLOW IN THE DARK KICKBALL SET assembly INSTRUCTIONS PITCHER PLATE ASSEMBLY 1. Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up. 2. Place the plate with the clips facing up. Take one of the glow sticks and slide it diagonally into the clips. 3. Take the second glow stick and slide it diagonally into the other two clips. This stick will sit on top of the stick attached in Step #2. 4.
PAGE 4
GLOW IN THE DARK KICKBALL SET assembly INSTRUCTIONS BASES ASSEMBLY 1. Take two individual glow sticks out and bend them until you hear a crackling sound and see them light up. 2. Lay the base ﬂat on the ground with the clips facing up. Take one of the sticks and slide it diagonally into the clips. 3. Take the second glow stick and slide it into the other two clips. This stick will sit on top of the stick attached in Step #2. 4.