TAPER AND DEBURRING COUNTERSINKERS
108 HSSE Co 5 DIN 335 C HSSE Co 5 DIN 335 C HSS DIN 335 C HSS DIN 335 C HSSE Co 5 DIN 335 C HSS DIN 335 C HSS DIN 335 C TC DIN 335 C ASP DIN 335 C HSS DIN 335 C HSS DIN 335 D HSS DIN 335 C HSS DIN 334 C HSS DIN 334 D HSS C HSS D Page C Miscellaneous DIN 335 Article no.
Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 < 900 N/mm² <1100 N/mm² <1300 N/mm² Main application Other application Titanium alloyed Cast iron Plastics Bronze Brass Aluminium Stainless steel Steel (N/mm2) < 900 05 109
HSS C HSS D HSS C Page Miscellaneous Article no.
Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 < 900 N/mm² <1100 N/mm² <1300 N/mm² Main application Other application Titanium alloyed Cast iron Plastics Bronze Brass Aluminium Stainless steel Steel (N/mm2) < 900 05 111
Technically perfected.
05 More precise. More powerful. Faster. The specially developed flute parameters, such as the angle, the transition radius as well as the extra-wide chip flute, ensures optimal chip and heat removal and therefore enables a high wear resistance. Furthermore, the new geometry prevents material welding and reduces the countersinking force.
DIN HSS HSSE Co 5 335 C 3 ≥ Ø 8,3 mm 90° ULTIMATECUT Taper and deburring countersinker DIN 335 type C 90° Ø2 Ø1 The ULTIMATECUT countersink is a high performance tool which stands for best performance: up to 30% time savings, twice as many countersinks as standard tools and excellent, smooth countersinking results in almost all materials.
HSS DIN 335 C 3 90° 05 ≥ Ø 8,3 mm ULTIMATECUT Taper and deburring countersinker sets HSS DIN 335 type C 90° in plastic case HSS HSS 5-piece set of ULTIMATECUT taper and deburring countersinkers HSS (DIN 335) type C 90° Ø 6,3 - 10,4 - 16,5 - 20,5 - 25,0 mm 102 791 RO 102 791 PRO HSSE DIN Co 5 335 C 102 791 PRO 102 790 PRO 102 790 PRO 102 790 RO 102 790 RO 6-piece set of ULTIMATECUT taper and deburring countersinkers HSS (DIN 335) type C 90° Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm 3 90°
TC C DIN 335 Ø2 Ø1 90° Taper and deburring countersinkers DIN 335 type C 90° Because of the CBN deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds.
HSS HSSE Co 5 TC C DIN 335 05 90° Taper and deburring countersinker sets DIN 335 type C 90° HSS, HSSE-Co 5 and tungsten carbide K 20 in steel case HSS HSS HSSE Co 5 HSS HSS TC 102 154 F — 6-piece set of taper and deburring countersinkers DIN 335 type C 90° Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm (Ø 16,5 mm = shank-Ø 10,0 mm) 102 152 102 152 A 102 152 E 102 152 T 102 152 F 102 152 HM 102 152 102 154 F 102 154 T 102 152 F 102 154 E 102 154 T 102 154 A 102 152 T 102 154 102 154
HSS HSSE Co 5 TC C DIN 335 90° Taper and deburring countersinker sets DIN 335 type C 90° HSS, HSSE-Co 5 and tungsten carbide K 20 in plastic case HSS HSSE Co 5 HSS HSS HSS TC – 6-piece set of taper and deburring countersinkers DIN 335 type C 90° Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm (Ø 16,5 mm = shank-Ø 10,0 mm) 102 152 RO – 102 152 ERO 102 152 TRO 102 152 FRO 102 152 HMRO 17-piece set of taper and deburring countersinkers DIN 335 type C 90° Ø 4,3 - 5,0 - 6,0 - 6,3 - 7,0 - 8,0 - 8,3 - 1
DIN 335 ASP C Ø2 Ø1 05 90° Taper and deburring countersinkers DIN 335 type C 90° ASP L1 The taper and deburring countersinker DIN 335 form C 90° ASP is made of powder-metallurgical metal and thus has a higher cutting edge stability. Best results in VA steels, Hardox 400 steels, titanium and titanium alloys.
HSS C Ø2 Ø1 90° Taper and deburring countersinkers DIN 335 type C 90° HSS, with long cylindrical shank Because of the CBN deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds.
DIN 335 HSS D Ø2 Ø1 05 90° Taper and deburring countersinkers DIN 335 type D 90° HSS L1 Packing unit: in plastic tubes of 1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed Ø2 mm Ø1 mm 15,0 16,5 19,0 20,5 23,0 25,0 26,0 28,0 30,0 31,0 34,0 37,0 40,0 50,0 63,0 80,0 HSS L1 mm 3,2 3,2 3,5 3,5 3,8 3,8 3,8 4,0 4,2 4,2 4,5 4,8 10,0 14,0 16,0 22,0 DIN 335 C 85,0 85,0 100,0 100,0 106,0 106,0 106,0
C HSS Inch" 82° Taper and deburring countersinkers type C 82° HSS, inch size Packing unit: in plastic tubes of 1 L1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed Ø2 inch mm Ø1 inch inch mm inch mm 1/4 5/16 3/8 1/2 5/8 3/4 7/8 1 6,4 7,9 9,5 12,7 15,9 19,1 22,2 25,4 3/64 4/64 5/64 6/64 7/64 8/64 9/64 9/64 3/16 1/4 1/4 5/16 3/8 3/8 3/8 3/8 5,0 6,0 6,0 8,0 10,0 10,0 10,0 10,0 1 3/4 2" 2" 2
DIN 334 HSS C Ø2 Ø1 05 60° Taper and deburring countersinkers DIN 334 type C 60° HSS L1 Packing unit: in plastic tubes of 1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed Ø2 mm Ø1 mm L1 mm Ø3 mm 6,3 8,0 10,0 12,5 16,0 20,0 25,0 1,6 2,0 2,5 3,2 4,0 5,0 6,3 45,0 50,0 50,0 56,0 63,0 67,0 71,0 5,0 6,0 6,0 8,0 10,0 10,0 10,0 DIN 334 HSS D Ø3 HSS 102 201 102 202 102 203 102 204 102 205 102
C HSS Ø1 75° Taper and deburring countersinkers type C 75° HSS L1 Packing unit: in plastic tubes of 1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed Ø2 mm Ø1 mm L1 mm Ø3 mm 6,3 8,3 10,4 12,4 16,5 20,5 25,0 1,6 2,0 2,5 3,2 4,0 5,0 6,3 45,0 50,0 50,0 56,0 63,0 67,0 71,0 5,0 6,0 6,0 8,0 10,0 10,0 10,0 D HSS Ø3 HSS 102 221 102 222 102 223 102 224 102 225 102 226 102 227 1 1 1 1 1 1 1 Ø2 Ø1
C HSS Ø2 Ø1 05 120° Taper and deburring countersinkers type C 120° HSS L1 Packing unit: in plastic tubes of 1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed Ø2 mm Ø1 mm L1 mm Ø3 mm 6,3 8,3 10,4 12,4 16,5 20,5 25,0 1,5 2,0 2,5 3,0 3,5 4,0 5,0 45,0 50,0 50,0 56,0 63,0 67,0 71,0 5,0 6,0 6,0 8,0 10,0 10,0 10,0 D HSS Ø3 HSS 102 241 102 242 102 243 102 244 102 245 102 246 102 247 1 1 1 1 1 1
C HSS 90° Taper and deburring countersinkers type C 90° HSS L1 05 Ø2 Only countersinking and deburring possible. Countersink with a blade not recommended for full countersinking.
Ø2 HSS HSSE Co 5 Ø1 05 L1 Slotted taper and deburring countersinkers 90° HSS, HSSE-Co 5 and HSS-TiN Peeling cut. Chip removal through the slot prevents chips from clogging the workpiece. Ideal for burr- and chatter-free deburring and countersinking. Applicable for steel, cast iron, non-ferrous and light metals. Best results at low cutting speeds. Countersink with a blade not recommended for full countersinking.
HSS 90° Taper and deburring countersinker bits 90° "short series" HSS / HSS-TiN with ¼" hexagonal shank Rapid tool-changing thanks to hexagonal bit holder. Ideal for burr- and chatter-free deburring and countersinking. Applicable for steel, cast iron, non-ferrous and light metals. Best results at low cutting speeds.
HSS Ø2 Ø1 05 90° Rapid tool-changing thanks to hexagonal bit holder. Ideal for burr- and chatter-free deburring and countersinking. Applicable for steel, cast iron, non-ferrous and light metals. Best results at low cutting speeds.
Ø2 Ø1 180° Flat countersinkers DIN 373 HSS and HSS-TiN with fixed guide For producing countersinkings for cylinderhead screws, thread-cutting screws and thread-furrowing screws. Ideal for burr- and chatter-free deburring and countersinking. Applicable for steel, cast iron, non-ferrous and light metals. Best results at low cutting speeds.
HSS DIN 373 05 180° Flat countersinker sets DIN 373 HSS and HSS-TiN with straight shank and fixed pilot in steel case HSS HSS 102 450 T 6-piece set of flat countersinkers for through holes, medium grade, for threads: M 3 - M 4 - M 5 - M 6 - M 8 - M 10 102 451 102 451 T 6-piece set of flat countersinkers for core holes, for threads: M 3 - M 4 - M 5 - M 6 - M 8 - M 10 102 452 102 452 T 102 451 102 450 T 102 450 102 450 6-piece set of flat countersinkers for through holes, fine grade, for threa
HSS 180° Flat countersinkers HSS with fixed guide For producing countersinkings for cylinderhead screws, thread-cutting screws and thread-furrowing screws. Ideal for burr- and chatter-free deburring and countersinking. Applicable for steel, cast iron, non-ferrous and light metals. Best results at low cutting speeds.
HSS Ø1 h8 L3 118° Subland drills long type N HSS Packing unit: in plastic tubes of 1 Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Rust-resistant steel Cast iron Aluminium Titanium alloyed 90° DIN 8374 134 Ø3 90° fine grade for through hole For efficient drilling of through holes and screw head counterborings with 90° angle.
Ø2 N HSS Ø1 h8 05 L3 118° L2 Subland drills short type N HSS L1 Short and torsion stable drill, suitable for the use on CNC or NC machines. The drilling and countersinking is made in one step. Application: adjust the cutting speed according to the big diameter and the feed rate according to the small diameter.
05 Table of recommended cutting speeds for taper and deburring countersinkers Material: High carbon struc. steel High carbon struc.
Table of recommended cutting speeds for Solid TC countersinkers Material: 05 High carbon struc. steel High carbon struc. steel Alloyed steel Cast iron Cast iron CuZn alloy CuZn alloy Aluminium alloy up to 700 N/mm² up to 700 N/mm² up to 1200 N/mm² up to 250 N/mm² over 250 N/mm² brittle tough up to 11% Si 15 12 8 12 10 25 15 20 Vc = m/min Ø mm r.p.m. f r.p.m. f r.p.m. f r.p.m. f r.p.m.
05 138
