HOLE SAWS
32 max 4,0 mm 15,0 100,0 113 015 113 100 236 14,0 210,0 106 014 106 200 238 - 239 14,0 210,0 126 014 126 200 238 - 239 Titanium alloyed <1300 N/mm² Cast iron <1100 N/mm² 2,5-5,0 mm Brass <900 N/mm² Page Article no.
max 2,5-5,0 mm HSS Ø1 10 5,0 mm HSS-G hole saws Packing unit: individual plastic pack Bronze Steel (N/mm2) < 1300 Plastics Stainless steel Cast iron Aluminium Titanium alloyed Ø1 mm Ø inch 12,0 13,0 14,0 15,0 16,0 17,0 18,0 19,0 20,0 21,0 22,0 23,0 24,0 25,0 26,0 27,0 28,0 29,0 30,0 31,0 32,0 33,0 34,0 15/32 PG Tube dimensions inch 9/16 5/8 PG 9 3/4 3/8 1/2 15/16 1 1/16 1 3/32 1 3/16 1 7/32 1 1/4 3/4 Ø2 mm 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,
max 4,0 mm TC 10,0 mm TC Tungsten carbide hole saws, shallow cut Packing unit: individual carton Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Stainless steel Cast iron Aluminium Titanium alloyed Ø1 mm Ø inch M + PG 16,0 16,5 17,0 18,0 18,6 19,0 20,0 20,4 21,0 22,0 22,5 23,0 24,0 25,0 25,5 26,0 27,0 28,0 28,3 29,0 30,0 32,0 32,5 34,0 35,0 36,0 37,0 38,0 5/8 ~ PG 9 M 16 3/4 PG 11 Tube dimensions inch 3/8 13/16 M 20 / PG 13,5 7/8 PG 16 1/2 15/1
max 4,0 mm TC 10,0 mm 10 TC Sets of tungsten carbide hole saws, shallow cut in plastic case 7- piece set of tungsten carbide hole saws with 5 tungsten carbide hole saws, shallow cut Ø 20,0 mm - 22,0 mm - 25,0 mm - 32,0 mm - 35,0 mm 1 cutting paste 50 g, article no. 101 021 1 extra pilot drill 6,0 mm HSSE-Co 5 article no.
max 4,0 mm TC 28,0 mm TC Tungsten carbide multigrade hole saws MHS Ø 15,0 up to 30,0 mm hole saw MHS and shank in one piece. Complete with pilot pin and wrench. Ø 31,0 up to 100,0 mm hole saws MHS without arbor. Ø 65,0 up to 100,0 mm on we recommend to use our morse taper holder article no. 113 203, 108 102 - 108 105. Adapter: thread M 18 x 6 P1,5 Ø2 Packing unit: individual carton Cutting depth in steel and VA steel max. up to 20.0 mm. In soft and non-ferrous metals max. up to 28.0 mm.
Arbor holders for tungsten carbide multigrade hole saws MHS with threaded retainer M18 x 6 P1,5 10 108 102 + 108 103 108 104 + 108 105 113 203 113 201 Packing unit: individual plastic pack For hole saws MHS Ø mm Shank Magnetic-stand drilling machine Article no. Arbor holder including pilot drill article no. 113 216 31,0 - 100,0 Ø 13,0 mm RS 10 113 201 1 Arbor holder including pilot drill article no.
10 Bi HSS HSSE Co 8 Metall Ø1 Jacket: special steel 38,0 mm HSS HSSE Co 8 Bi-metal hole saws HSS with variable pitch toothing / HSSE-Co 8 with regular fine pitch toothing Packing unit: individual carton Steel (N/mm2) < 900 Brass Steel (N/mm2) < 1100 Bronze Steel (N/mm2) < 1300 Plastics Stainless steel Cast iron Aluminium Titanium alloyed 238 Ø mm Ø inch 14,0 16,0 17,0 19,0 20,0 21,0 22,0 24,0 25,0 27,0 28,0 29,0 30,0 32,0 33,0 35,0 36,0 37,0 38,0 40,0 41,0 43,0 44,0 46,0 48,0 50,0 51,0 5
Bi HSS HSSE Co 8 Metall Jacket: special steel 38,0 mm HSS 10 HSSE Co 8 Sets of bi-metal hole saws HSS / HSSE-Co 8 in plastic cases HSS HSSE Co 8 106 306 126 306 EK 1 8- piece set of bi-metal hole saws for electricians 6 bi-metal hole saws Ø 22,0 - 29,0 - 35,0 - 44,0 - 51,0 - 64,0 mm + 2 arbor holders A2 and A4 106 305 126 305 EK 2 8- piece set of bi-metal hole saws for electricians 6 bi-metal hole saws Ø 22,0 - 29,0 - 35,0 - 44,0 - 51,0 - 68,0 mm + 2 arbor holders A2 and A4 106 302 126 302
Arbor holders including pilot drill for bi-metal hole saws HSS and HSSE-Co 8 Hole saws Ø mm Arbor holders Type 14,0 - 30,0 32,0 - 210,0 14,0 - 30,0 14,0 - 30,0 32,0 - 210,0 32,0 - 210,0 A1 A2 A4 A5 A6 A7 Shank Ø mm 11,0 11,0 6,0 9,5 9,5 10,0 Shank shape SDS-Plus Thread 1/2" x 20 5/8" x 18 1/2" x 20 1/2" x 20 5/8" x 18 5/8" x 18 106 202 + 106 209 106 204 106 201 + 106 210 Packing unit: individual carton HSSE Co 5 HSS 106 201 106 202 106 204 106 210 106 209 106 211 126 201 126 202 126 204 126
Recommended cutting speeds for bi-metal hole saws HSS and HSSE-Co 8 Material: Vc = m/min Coolant: High carbon struc. steel Alloyed steel Cast iron up to 700 N/mm² up to 1000 N/mm² over 250 N/mm² 30 20 10 Cutting spray 10 CuZn alloy Aluminium alloy Thermoplastics Duroplastics Wood 20 15 40 up to 11% Si 35 30 Cutting spray Compressed air Compressed air Cutting spray Water Compressed air Compressed air Ø mm Ø inch r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m.
10 Recommended cutting speeds for tungsten carbide hole saws Material: Vc = m/min Coolant: 242 High carbon struc. steel Alloyed steel Cast iron up to 700 N/mm² up to 1000 N/mm² over 250 N/mm² 30 20 10 Cutting spray CuZn alloy Aluminium alloy Thermoplastics Duroplastics Wood 30 20 15 up to 11% Si 60 35 Cutting spray Compressed air Compressed air Cutting spray Water Compressed air Compressed air Ø mm Ø inch r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m.