Data Sheet

01
39
Ø
L2
L1
HSS
-
G
DIN
338
TURBO
36°
h8
≥ Ø 4,0 mm
3
≥ Ø 2,0 mm
C
5 x Ø
HSS
-
G
Main application Other application
For use on: non-alloy and alloy steel (up to grade of approx. 900 N/mm² ), for drilling thin-walled
profiles and sheeting up to 5,0 mm, plastics and wood.
Twist drills DIN 338 type TURBO, HSS ground
Ground twist drill in high-performance high-speed steel. Drills very cleanly with burr-free hole edges.
Immediate drilling start after insertion as no prepunching is necessary. Shatter stability is increased
by up to 50 % as the core diameter increases constantly in the direction of the shank (from Ø 3,2 mm).
Triple milled clamping areas prevent the drill from spinning in the machine (from Ø 5,0 mm).
Packing unit: in plastic box
Steel (N/mm2) < 900
Steel (N/mm2) < 1100
Steel (N/mm2) < 1300
Rust-resistant steel
Aluminium
Brass
Bronze
Plastics
Cast iron
Titanium alloyed
Ø
mm
L1
mm
L2
mm
1,00 34,0 12,0 2146 010 10
1,50 40,0 18,0 2146 015 10
2,00 49,0 24,0 2146 020 10
2,50 57,0 30,0 2146 025 10
3,00 61,0 33,0 2146 030 10
3,20 65,0 36,0 2146 032 10
3,30 65,0 36,0 2146 033 10
3,50 70,0 39,0 2146 035 10
4,00 75,0 43,0 2146 040 10
4,10 75,0 43,0 2146 041 10
4,20 75,0 43,0 2146 042 10
4,50 80,0 46,0 2146 045 10
4,80 86,0 46,0 2146 048 10
5,00 86,0 46,0 2146 050 10
5,10 86,0 46,0 2146 051 10
5,20 86,0 46,0 2146 052 10
5,40 93,0 52,0 2146 054 10
5,50 93,0 52,0 2146 055 10
6,00 93,0 57,0 2146 060 10
6,50 101,0 58,0 2146 065 10
6,80 109,0 66,0 2146 068 10
7,00 109,0 66,0 2146 070 10
7,50 109,0 66,0 2146 075 10
8,00 117,0 72,0 2146 080 10
8,50 117,0 72,0 2146 085 10
9,00 125,0 78,0 2146 090 10
9,50 125,0 78,0 2146 095 10
10,00 133,0 84,0 2146 100 10
10,50 133,0 84,0 2146 105 5
11,00 142,0 91,0 2146 110 5
11,50 142,0 91,0 2146 115 5
12,00 151,0 98,0 2146 120 5
12,50 151,0 98,0 2146 125 5
13,00 151,0 98,0 2146 130 5
High performance twist drill for all-purpose use in drilling machines
and cordless drills. (Materials up to 5,0 mm thickness)