Data Sheet

06
156
L1
No.
Explanation of symbols from page 315
Die stocks as per DIN 225
For closed and slotted taps as per DIN EN 24231.
With steel handles one of which can be unscrewed and five screws for clamping the tap.
Version: die-cast zinc housing
Packing unit: individual plastic pack
Size Thickness
mm
L1
mm
16 5,0 160,0 M 1 - M 2,6 1/16 - 3/32 — 242 165 1
20 5,0 175,0 M 3 - M 4 1/8 - 5/32 — 242 205 1
20 7,0 175,0 M 4,5 - M 6 3/16 - 1/4 — 242 207 1
25 9,0 210,0 M 7 - M 9 5/16 1/16 242 259 1
30 11,0 260,0 M 10 - M 11 3/8 - 7/16 1/8 242 3011 1
38 14,0 310,0 M 12 - M 14 1/2 - 9/16 — 242 3814 1
45 18,0 440,0 M 16 - M 20 5/8 - 3/4 — 242 4518 1
55 22,0 495,0 M 22 - M 24 7/8 - 1 — 242 5522 1
65 25,0 630,0 M 27 - M 36 1 1/8 - 1 3/8 — 242 6525 1
75 30,0 700,0 M 38 - M 42 1 1/2 - 1 5/8 — 242 7530 1
90 36,0 900,0 M 45 - M 52 1 3/4 - 2 — 242 9036 1
105 36,0 930,0 M 54 - M 63 2 1/4 - 2 3/4 — 242 10536 1
38 10,0 310,0 MF 12 - MF 14 — 1/4 242 3810 1
45 14,0 440,0 MF 16 - MF 20 — 3/8 - 1/2 242 4514 1
55 16,0 495,0 MF 22 - MF 24 — 5/8 - 3/4 242 5516 1
65 18,0 630,0 MF 27 - MF 36 — 7/8 - 1 242 6518 1
75 20,0 750,0 MF 38 - MF 42 — 1 1/8 - 1 1/4 242 7520 1
90 22,0 900,0 MF 45 - MF 52 — 1 3/8 - 1 5/8 242 9022 1
105 22,0 930,0 MF 54 - MF 63 — 1 3/4 - 2 242 10522 1
for tap size
M + MF Ww G