Data Sheet

06
181
M
Ø1
L1
L2
Ø2
60°
DIN
2174
4
D
ISO 2
6H
HSSE
Co 5
HSSE
Co 5
HSSE
Co 5
271 ... N
HSSE
Co 5
HSSE
Co 5
271 ... F
Main application Other application
Forming taps DIN 2174 HSSE-Co 5-nitrated-VAP
and HSSE-Co 5-TiAlN, ground
Thread: metric, DIN ISO 13
Flanks: relief-ground
Forming taps with reinforced shank for through threads and bottoming.
As shaping is done without cutting, no interruption of the course of the fibre in the material.
The deformation creates very rigid threads. Consistent accuracy even with high productivity.
General information:
Tapping Thread forming
Fibre orientation
in tapping
Fibre orientation
in thread forming
Packing unit: individual plastic pack
Steel (N/mm2) < 800
Steel (N/mm2) < 1000
Steel (N/mm2) < 1200
Rust-resistant steel
Aluminium
Brass
Bronze
Plastics
Cast iron
Titanium alloyed
Nominal
thread size M
Pitch
mm
Thread core hole
Ø1 mm
L1
mm
L2
mm
Ø2
mm
M 3 0,50 2,80 56,0 11,0 3,5 271 003 N 271 003 F 1
M 4 0,70 3,70 63,0 13,0 4,5 271 004 N 271 004 F 1
M 5 0,80 4,65 70,0 16,0 6,0 271 005 N 271 005 F 1
M 6 1,00 5,55 80,0 19,0 6,0 271 006 N 271 006 F 1
M 8 1,25 7,45 90,0 22,0 8,0 271 008 N 271 008 F 1
M 10 1,50 9,35 100,0 24,0 10,0 271 010 N 271 010 F 1
M 12 1,75 11,20 110,0 28,0 9,0 271 012 N 271 012 F 1
HSSE-Co 5 TiAlN
The forming tap consists of cobalt alloyed
heavy-duty high-speed steel with titanium
aluminium nitride coating. Applications: for
non-alloyed and alloyed steels up to a strength
of 1000 N/mm², V2A and non-ferrous metals.
HSSE-Co 5-nitrated-VAP
The forming tap consists of cobalt alloyed,
nitrated and vaporised heavy-duty high-speed
steel. Applications: for non-alloyed and alloyed
steels up to a strength of 1000 N/mm² and non-
ferrous metals.