Manual for RunCam HD Born for RC Fanatics V1.
Sketch of buttons and features 1. Function Buttons Power Button: Press the Power Button to turn the camera ON or OFF. ● In Playback Mode, pressing the power button can allow the user to choose the different video file. ● Contens Power Button ...................................................... 1 ShutterButton.......................................................1 Mode Button ........................................................ 1 Reset Button ........................................................
2. Instructions Battery Charging: There is standard Mini 5-Pin USB cable included in the product packaging. Please connect one end to the camera and the other end to 5 V DC power supply (For instance, a charger, USB port of a PC, or another portable power source). ● The camera will turn on automatically once it is powered on. When the camera detects that it is being charged, it will turn off automatically for more efficient charging. ● When charging, Indicator A will display green.
To turn the camera on: Press the Power Button and release after 1 second to turn on the camera. The Indicator A light will change from Blue to Yellow. The camera will then switch to Standby status of Video Mode 1. ● Video Mode and Switching Operations: Video Mode 1 (Indicator A showing with Yellow light constantly): Default 1080p@30fps Full HD recording. ● Video Mode 2 (Indicator A showing with Blue light constantly): Default 720P@60fps HD recording.
Indicator A illuminating a constant Green light: the battery is charging. ● When the camera is turned on, and the Indicator A quickly flickers a Yellow light: there is no memory card detected or the memory card is invalid. Please format the memory card or change a new card. (About formatting, please refer to following “Format the Memory Card” chapters). ● Indicator A quickly flickers a Red light during video recording: the battery is low and the camera will turn off automatically in several seconds.
Reset: Turn the camera on, press the Reset Button to restore it to factory settings. ● Shutdown: In any mode, press the Power Button for at least 1 second and release. Indictor A will turn Red and blink Three times. The camera will then completely shut down. ● Connect the Camera to PC: Using a standard USB cable, the camera can be used as a removable storage device.