User's Manual

e
Instruction Diagram
e
Basic Camera Operation
Charging:
Type-C only supports DC 5V power supply, please use conventional phone charger or power bank.
Green light will turn on during charging, while it will tun off when it is fully charged.It takes about 2
hours to get fully charged.
Low Battey Reminder:
When the battery is lower than 8%, the camera vibrates 4 times continuously, 30s each vibration.
Capacity up to 128GB; High Speed SD card (Class 10/UHS-I/UHS-II/UHS-III )is highly recommended
MicroSD Card
Push button down,
LED1 and LED2(Red Light) turn off simultaneously
Long pressing WIFI button 3s,
LED1 (Blue light) off, the camera turns off simultaneously
Forced shutdown
Long pressing WIFI button 8s
No SD card or SD card abnormality, LED1,
LED2 have a quick flash simultaneously
Note: The camera only supports FAT32 or exFAT format, SD cards over 64GB must be formatted via the App.
Operation1: Long Pressing WIFI button 3s in recording status
Waiting for a connection: LED1( Blue light flashes slowly at 1s interval),
Connected: LED1(Blue Light is on)
Operation2: Long Pressing WIFI button 3s in shutdown status
Waiting for a connection: LED1( Blue light flashes slowly at 1s interval)
Connected: LED1(Blue Light is on)
Push button up,
LED1, LED2(Red Light) have a slow flash at 1s interval simultaneously
Scope cam 2 User Manual
Stop Recording
Open WIFI
Close WIFI
Abnormal Status
Start Recording
e
Connection to the Computer
5ZQF$
e
Parameter
e
"QQ
1. Long press WiFi button 3s, LED1(blue light) flashes, WiFi is started and waiting for connection.
3. Default SSID: RCSC02_*****PW:1234567890
2. Find the SSID connection of the Scope Cam 2 in the wireless network of the mobile phone and
enter the password, after successful connection, firmware update/WIFI indicator（blue light) is
constantly on
U Disk Mode:
Connecting to PC via TYPE-C to USB, the camera will enter into U disk mode automatically, recording
indicator(red light） is on
WEBCAM/PCCAM/UVC Mode
Short pressing WIFI button to switch to WEBCAM/PCCAM/UVC mode in U disk mode, then Short
pressing WIFI button can switch back and forth to U Disk or WEBCAM mode.
NOTICE: If the camera cannot be recognized after connecting to the computer, please confirm whether there is microSD card in Scope cam 2.
If the information in the SD card cannot be read normally, please replace the USB cable or retry the computer USB port.
e
Firmware Upgrade
Firmware Upgrade Status (Blue light blinks)Ensure that the Scope Cam battery is more than 50%
before the upgrade.
Manually copy the firmware file (FWSCLITE.bin) onto the microSD card. Follow the instruction on
https://runcam.com/download/scopecam2.
To get the latest features and best performance from your Scope Cam, make sure you are using the
most current camera software. You can update your firmware with the RunCam App or at
https://runcam.com/download/scopecam2.
Android and iOS APP: Search 'RunCam App' on Google Play/App Store, or download on our website:
https://runcam.com/download/scopecam2.
Image Sensor
Lens
ISO
Shutter
Resolution
Video format
Memory Card
File system
Battery
Battery life
Charging time
Wi-Fi
USB Interface
Work Current
Work Temp
Housing Material
Vibration motor
Waterproof
Mount
Net Weight
Dimensions
1/2.9”CMOS 2MP
40mm@FOV 8.2 25mm@FOV 12° 3.6mm@FOV 126
100 / 200 / 400 / 800 / 1600
1~1/500s
1080P@60fps / 1080P@50fps / 720P@90fps
MP4(H.264)
Micro SD(Max 128g)
Fat32/exFat
1400mAh
About 240 minutes (1080P@60fps)
About 120 minutes
2.4g
Type-C
1.25W (wi-fi off)
-10°C ~ 45°C
Aluminum alloy & PA
Built-in
IP64
Picatinny
40mm@135g 25mm@130g 3.6mm@118g
112mm*32mm*36mm 93mm*32mm*36mm 79mm*32mm*36mm
e
Technical Support
Please visit: https://support.runcam.com/hc/en-us




WiFi Button
Powering on /off Switch

LED1 Red Light（Recording Status）/ Blue Light(WiFi Status)

LED2 Red Light( Recording Status)/ Green Light (Charging Status)

Type-C


Micro-SD Card Slot
MICROPHONE




