Specifications

Installation
34 Runco RS-1100 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Attaching Lens Mounting Assembly to Lens Motor Carriage Plate:
1. Remove the two Yaw/X Adjustment Levers and 1/4-20 Fiber Washers from the
bottom of the lens mounting assembly.
2. Place the Lens Mounting Assembly on top of the Lens Motor Carriage Plate. Position
the bracket so that the long slot at the bottom of the bracket is perpendicular to the
corresponding slots on the carriage plate.
3. Secure the Lens Mounting Assembly to the plate with the Yaw/X Adjustment Levers
and Washers that you removed in Step 1.
4. Attach the Lens Adapter Ring to the Pitch Adjustment Yoke using the three Lens
Rotation Set Screws; see
Figure 3-17. Then, attach the lens to the Lens Adapter Ring
by threading it clockwise.
Figure 3-17. Attaching the Anamorphic Lens to the Lens Ring
F
O
C
U
S
LENS THREADS
INTO RING
Lens Rotation Set Screws