Specifications

Maintenance and Troubleshooting
Runco RS-1100 Series Owner’s Operating Manual 67
PRE
L
IMINAR
Y
TEMP and LAMP LEDs are
both flashing red.
• The lamp cover is open.
• Fans are not working
properly.
• Close the lamp cover.
• Please contact your Runco
dealer for assistance.
LAMP LED lights solid red. • The lamp has failed or
exceeded its usage life.
• Replace the lamp with a
new one.
TEMP LED lights solid red. • RS-1100 internal
temperature is too high.
• Power off the RS-1100
and allow it to cool down.
Ensure that the intake and
exhaust vents are not
blocked. Turn the
projector back on. If the
problem persists, please
contact your Runco dealer
for assistance.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution