International Home Theater System User Manual

System Overview

10 D-73d Series Installation/Operation Manual

PRE

IMINAR

1. POWER INPUT (Left-Eye Engine – 100 to 240 VAC)

Connect the left-eye optical engine to power here.

2. DHD INPUT (Left-Eye Engine)

An HDCP-compliant digital video input for connecting the HDMI Out (To Display)

from the Primary DHD Controller.

3. RS-232C INPUT (Left-Eye Engine) (9-pin, female D-Sub)

Connect the Display Control output on the Primary DHD Controller to this input (see

Figure 2-5).

4. STANDBY LED (Left-Eye Engine)

Indicates left-eye engine status as follows:

• Solid green = AC power present, ready to turn on.

• Flashing green = Projector is initializing; keypad functions not allowed.

• Off = Normal operation.

5. ERROR LED (Left-Eye Engine)

Indicates left-eye engine error conditions as follows:

• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix

problem

• Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST)

failure).

6. ERROR LED (Right-Eye Engine)

This LED operates identically to the ERROR LED on the left-eye engine.

7. STANDBY LED (Right-Eye Engine)

This LED operates identically to the STANDBY LED on the left-eye engine.

8. RS-232C INPUT (Right-Eye Engine) (9-pin, female D-Sub)

Connect the Display Control output on the Secondary DHD Controller to this input.

9. DHD INPUT (Right-Eye Engine)

An HDCP-compliant digital video input for connecting the HDMI Out (To Display)

from the Secondary DHD Controller.

10. POWER INPUT (Right-Eye Engine – 100 to 240 VAC)

Connect the right optical engine to power here.

11. CINEWIDE/AUTOSCOPE +12V TRIGGER OUTPUT

Connect the AutoScope anamorphic lens transport (if present) to this output.