O W N E R ’S O P E R A T I N G M A N U A L CX-40HD CX-46HD High-Definition, 1080p Liquid-Crystal Display (LCD) Panels with
ONE YEAR LIMITED WARRANTY For LCD Displays Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of unparalleled video performance. This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents.
RIGHTS, LIMITS AND EXCLUSIONS: Runco limits its obligations under any implied warranties under state laws to a period not to exceed the warranty period. There are no express warranties. Runco also excludes any obligation on its part for incidental or consequential damages related to the failure of this product to function properly. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages.
ADDITIONAL INFORMATION: To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this Limited Warranty, please call or write: EL IM IN A R Y RUNCO INTERNATIONAL, INC.
Safety Precautions Thank you for your purchase of this quality Runco product! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation. WARNING This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
1 Table of Contents ONE YEAR LIMITED WARRANTY .................................................................................. iii Safety Precautions ......................................................................................................... vi 1. Introduction ...............................................................................................................1 About This Manual ......................................................................................................
Table of Contents 4. Operation .................................................................................................................25 Turning on the Power .................................................................................................25 Changing the OSD Language .....................................................................................25 Setting the PC Display Properties ...............................................................................
1 List of Figures 2-1. Crystal Series LCD Display Controls and Indicators ......................................................5 2-2. Crystal Series LCD Display Rear-Panel Inputs and Outputs ..........................................6 2-3. Crystal Series LCD Display Remote Control..................................................................8 3-1. Antenna/Cable TV Connection ...................................................................................16 Y 3-2. HDMI Connections ...............
PR EL IM IN A R Y List of Figures x Runco CX-40HD/CX-46HD Owner’s Operating Manual
1. Introduction Y This Owner’s Manual describes how to install, set up and operate the Runco Crystal Series Model CX-40HD and CX-46HD LCD Displays. Throughout this manual, the Runco CX-40HD and CX-46HD LCD Displays are referred to simply as the “Crystal Series LCD Display.” EL IM IN A R Runco has prepared this manual to help home theater installers and end users get the most out of the Crystal Series LCD Display. 1.
Introduction Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury: Note NOTES emphasize text with unusual importance or special significance. They also provide supplemental information. Caution CAUTIONS alert users that a given action or omitted action can degrade performance or cause a malfunction.
Introduction Runco presents the Crystal Series CX-40HD and CX-46HD LCD Displays, perfect for those who demand our award-winning flat panel performance in a more intimate size than we offer with our larger plasma monitors. The Crystal Series LCD Displays are ideal for close-in viewing where picture quality remains a high priority, but larger displays cannot be accommodated. 1.
Introduction Parts List ➤ Your Crystal Series LCD Display is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO.
2. Controls and Functions 2.1 Crystal Series LCD Display at a Glance EL IM IN A R Y Figure 2-1 shows the locations of the Crystal Series LCD Display controls and indicators. Right Side TV/AV 1 MENU 2 + VOL 3 – CH 8 PR 8 4 5 7 6 Figure 2-1. Crystal Series LCD Display Controls and Indicators 1. TV/AV Button (Input Source Selection) 2. MENU Selection Button 3. Volume Adjustment Buttons 4. Channel Selection Buttons 5. Power Button 6. Remote Control Sensor 7.
Controls and Functions Crystal Series LCD Display ➤ Inputs and Outputs Figure 2-2 shows the locations of the Crystal Series LCD Display inputs and outputs. Right Side INPUT2 Audio Y R L VIDEO EL IM IN A R S-VIDEO PR Rear INPUT4 INPUT3 INPUT1 INPUT4 INPUT3 INPUT1 Figure 2-2. Crystal Series LCD Display Rear-Panel Inputs and Outputs 1. INPUT2 Audio Input 2.
Controls and Functions 9. HDMI2/Computer Input (Digital) Two, HDCP-compliant digital video inputs for connecting a DVD player, personal computer or HD tuner with a DVI or HDMI output. Tip For best results, do not run your DVD player in progressive mode. 10. PC Audio Input Connect the audio output from a personal computer here. EL IM IN A R Y 11. INPUT3 Component Video (RCA connectors) Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input.
Controls and Functions 2.2 Crystal Series LCD Display Remote Control Figure 2-3 shows the Crystal Series LCD Display remote control, and the paragraphs that follow describe its functionality.
Controls and Functions 1. OFF / ON Use these buttons to turn the Crystal Series LCD Display on or off. 2. Numeric Buttons Use these buttons to enter TV channel numbers or menu pass codes. Use the TV button to switch to the Antenna/DTV/CATV input. Use the - button to enter DTV sub-channel numbers. 3. Source Selection Buttons INPUT 1 Press this button to switch to Input 1. EL IM IN A R Y INPUT 2 Press this button to switch to Input 2. INPUT 3 Press this button to switch to Input 3.
Controls and Functions 5. Aspect Ratio Selection Buttons ANA (16:9 Anamorphic) For 16:9 DVDs or HDTV program material. 4X3 (Standard 4:3) The input signal is scaled to fit 4:3 display mode in the center of the screen. LETBOX (Letterbox) Image in letterbox format is enlarged to fit 16:9, full-screen display and the upper/lower portions are “blanked off.” Y VWIDE (VirtualWide) 4:3 image is enlarged NON-linearly in horizontal direction to fit 16:9 full screen display. EL IM IN A R 6.
Controls and Functions 10. TIMER OFF Button Press this button to set the sleep timer. Press it repeatedly to scroll through the available options (Off, 10, 30, 60, 120 or 180 minutes). 11. Sound Control Buttons S.MODE Press this button repeatedly to scroll through the available Equalizer presets (CUSTOM, STANDARD, MUSIC, FILM or SPEECH). Y SURRND (Surround) Press this button to turn Surround Mode on or off.
Controls and Functions PR EL IM IN A R Y Notes: 12 Runco CX-40HD/CX-46HD Owner’s Operating Manual
3. Installation 3.1 Remote Control To install batteries in the remote control: Battery Installation 1. Slide the battery cover in the direction of the arrow and remove it. EL IM IN A R 3. Slide the battery cover back on until it snaps into place. Note and Y 2. Insert the included batteries. Ensure that the polarities correctly match the markings inside the battery compartment. 1. Do not mix an old battery with a new one or different types of batteries. 2.
Installation 3.2 Quick Setup Table 3-1 gives a quick overview of the Crystal Series LCD Display installation process. The sections following this one provide detailed instructions. Note Installation should be performed by a qualified custom video installation specialist. Y Table 3-1. Installation Overview Procedure PR EL IM IN A R Step For Details, refer to page...
Installation Proper installation of your Crystal Series LCD Display will ensure the highest possible picture quality. Whether you are installing the Crystal Series LCD Display temporarily or permanently, you should take the following into account to ensure that it performs optimally. You can either place the Crystal Series LCD Display on a table or in an entertainment center, or mount it on a wall. 3.
Installation 3.4 Connections to the Crystal Series LCD Display Proceed as follows to connect the Crystal Series LCD Display to your video sources, external controller(s) – if present – and AC power. When connecting your equipment: • Turn off all equipment before making any connections. • Use the correct signal cables for each source. • Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have them.
Installation HDMI Connections: The Crystal Series LCD Display has two HDMI inputs for connecting a DVD player, DTV decoder, personal computer or any other device with an HDMI or DVI output. Connect such devices as shown in Figure 3-2. Tip This Crystal Series LCD Display supports the VESA Display Data Channel (DDC) standard. This standard provides “Plug and Play” capability; the display and a VESA DDC-compatible computer communicate their setting requirements, allowing for quick and easy setup.
Installation RGB Connections: The Crystal Series LCD Display has an RGB input for connecting a personal computer; see Figure 3-3. Rear of the Display Rear of the PC INPU INPUT3 Y Audio Cable (Sold Separately) EL IM IN A R D-Sub 15 Pin Cable (Sold Separately) Figure 3-3. Analog RGB Connections Note 1. Refer to Computer Signal Compatibility on page 61 for a list of computer signals compatible with the Crystal Series LCD Display.
Installation Component Video Connections: If you have a DVD player or DTV decoder with a component (YPbPr) output, connect it to INPUT 3 or INPUT 4 of the Crystal Series LCD Display as shown in Figure 3-4. INPUT4 Y INPUT3 EL IM IN A R Audio Cable DVD/DTV STB Video Cable Figure 3-4.
Installation AV OUT Connection ➤ The Crystal Series LCD Display has stereo audio and Composite video outputs for connecting to a second VCR or other auxiliary equipment. Connect the AV OUT audio and video jacks to the audio and video inputs of the VCR or other equipment as shown in Figure 3-6. You can route either the main or picture-in-picture (PIP) source signal to the AV output. For more information, refer to Monitor Out on page 40. The audio output level is fixed.
Installation The Crystal Series LCD Display is equipped with stereo speakers, which are mounted directly below the screen. If you prefer, you can connect the rear-panel speaker outputs to external speakers. Connect the (positive) and (negative) speaker wires to the rear-panel SPEAKER-R and SPEAKER-L terminals; see Figure 3-8. Maintain the correct polarity. For more information, refer to the owner’s manual for your speakers. Twist exposed wire strands together.
Installation Connecting to a Dolby ➤ Digital Amplifier If your home theater has a Dolby Digital amplifier or receiver, connect the digital audio output from the Crystal Series LCD Display to the digital audio input of the amplifier/receiver as shown in Figure 3-10. The Crystal Series LCD Display supports both coaxial (S/PDIF) and optical (TosLink) digital audio connections. The audio output level is fixed. (The volume and mute controls affect only the speaker and headphone outputs.
Installation Use a standard RS-232 cable with a 9-pin male connector to connect a PC or home theater control/automation system (if present) to the RS-232 port on the Crystal Series LCD Display; see Figure 3-11. For more information about using this connection, refer to Serial Communications on page 51. EL IM IN A R Connector Pin Assignments: 2 3 5 1, 4, 6, 7, 8, 9 Rear Panel Y DB-9 Male To PC or Automation/ Control System Receive Data Transmit Data Ground Not Connected PR Figure 3-11.
Installation PR EL IM IN A R Y Notes: 24 Runco CX-40HD/CX-46HD Owner’s Operating Manual
4. Operation 1. Turn on your source components. 2. Plug the female end of the supplied power cord into the AC receptacle on the rear of the Crystal Series LCD Display (AC 100V ~ 240V). See Figure 2-2. 4.1 Turning on the Power 3. Connect the other end to your AC power source. EL IM IN A R 5. Press the ON button on the remote control to turn on the display (or press the power button on the side of the display). The power indicator flashes for a few seconds, then lights solid green. Y 4.
Operation 4.3 Setting the PC Display Properties To maximize image quality when using the Crystal Series LCD Display with a personal computer, you may need to adjust the display properties of your PC video card. To do this: EL IM IN A R Y 1. Choose Settings from the Windows Start menu and click on “Control Panel.” 2. Double click on the Display icon. 3. Click the Settings tab on the display dialog box. PR 4. Adjust the resolution to 1024x768 pixels. 5.
Operation Note 1. The maximum available resolution and vertical frequency is 1600x1200/60Hz (RGB), 1280x1024/60Hz (HDMI) or the maximum supported by your video card, whichever is lower. You can get the best picture at 1024x768/60Hz. 2. The Crystal Series LCD Display supports 24-bit color (16,777,216 possible colors). 1. Press MENU to display the Main Menu. , ) on the remote EL IM IN A R 2. To select a menu item, use the up- or down-arrow buttons ( control to highlight it.
Operation Picture Adjust Color Temp. PC Mode Adjust Digital Mode Analog Mode Equalizer Audio Surround Audio Language Digital Audio Out TV Speaker Audio Delay Auto Tuning Caption PR Channel CC On Mute 0, 1, 2, 3 ... 100 Gamma Save Settings (not available on RGB input) Restore Settings (not available on RGB input) Balance 0, 5, 10, ... 100 0, 10, 20, ... 100 0, 1, 2, 3 ... 63 0, 5, 10, 15, 20, ... 100 5400, 6500, 8500 or Custom 2.00, 2.02, 2.04 ... 2.
Operation The Main Menu is the starting point for accessing all Crystal Series LCD Display functions. (The ISF Calibration menu is not accessible until you enter a passcode.) Main Menu Runco CX-40HD Source Aspect Ratio Picture Adjust Audio Channel Timer Setup EL IM IN A R From the Main Menu, select Source to choose a video signal source. Y ISF Calibration The active source is indicated by an arrow (>) to its left; in the example at right, TV is the active source.
Operation Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key 16:9 ANA Description EL IM IN A R Y 16:9 Image on 16:9 Screen (Display) Select 16:9 to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 display.
Operation Use the controls in the Picture Adjust menu to calibrate your Crystal Series LCD Display for optimum picture quality. The Crystal Series LCD Display has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF).
Operation PLUGE patterns vary but generally consist of some combination of black, white and gray areas against a black background. The example above includes two vertical bars and four shaded boxes. Select Brightness from the Picture Adjust menu. Using the left- and right-arrow ( buttons, adjust the brightness so that: ) • The darkest black bars disappear into the background. • The dark gray areas are barely visible. • The lighter gray areas are clearly visible.
Operation EL IM IN A R Y blue red magenta green cyan yellow gray Color Saturation: On your external test pattern source, select a color bar pattern like the one shown in Figure 4-4. Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint blue red magenta green cyan PR yellow gray Select Color from the Picture Adjust menu.
Operation EL IM IN A R Y Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust sharpness, select Sharpness from the Picture Adjust menu and press ENTER. On your external test pattern source, select a pattern like the one shown in Figure 4-5. Adjust as needed, looking for white edges around the transitions from black to gray and different sized lines in the “sweep” patterns at the top and bottom. Lower the sharpness setting to eliminate them. PR Figure 4-5.
Operation Gamma: The Gamma control determines how gray shades are displayed between minimum input (black) and maximum input (white) for all signals. A good gamma setting helps to optimize blacks and whites while ensuring smooth transitions for the “in-between” values utilized in other grays. Unlike brightness and contrast controls, Gamma allows you to lighten or darken the overall tone of your images without changing the extremes.
Operation Audio Language: Some digital TV broadcasts provide audio soundtracks in multiple languages. If you are watching such a program, select Audio Language from the Audio menu to choose a soundtrack language: English, Français, Español or Português. Digital Audio Out: The Crystal Series LCD Display can output either two or six channels of digital audio. Select Dolby Digital if your A/V receiver can decode a Dolby Digital-encoded, 5.1-channel bitstream.
Operation To set the Crystal Series LCD Display’s internal clock or configure the on/off timers, select Timer from the Main Menu and press ENTER. Time: To set the Crystal Series LCD Display internal clock, select Time from the Timer menu and press ENTER. Then, do either of the following: • To synchronize the internal clock with time codes sent by the local Public Broadcasting Service (PBS) member station, select Auto Setup.
Operation Setup ➤ Setup Use the controls in the Setup menu to perform advanced image quality adjustments and access various other Crystal Series LCD Display features. OSD Language: Select OSD Language from the Setup menu and press ENTER. Then, use the up- or down-arrow buttons to select the OSD language (English, French, Spanish, Portuguese or German). Press ENTER again to confirm your selection.
Operation embedding Internet data (called Interactive TV Links, or ITV Links) in the captions. • CC On Mute: To have the Crystal Series LCD Display show captions when the audio output is muted, set this option to Yes. • Digital Font Option: Select Digital Font Option from the Caption menu to customize the appearance of closed captions in digital TV broadcasts. • Control: Select Program to view the closed captions as presented by the broadcaster.
Operation Table 4-2. FCC Ratings and Content Categories (continued) Rating/Category Description S Sexual content V Violence Y • Movie Rating: Select Movie Rating from the Parental Control menu to block movies carrying a given rating, to prevent children from watching movies that are deemed inappropriate. These ratings have been established by the Motion Picture Association of America (MPAA) to help parents and other caregivers determine if a movie is suitable for young viewers.
Operation Overscan (not available for RGB input): Overscan pushes the outside edge of the active picture area of the video signal out beyond the edge of the display area. Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Overscan effectively trims away these inactive, outer edges and enlarges the remaining portion of the image to fill the display area.
Operation ISF Calibration ➤ Use the ISF Calibration menu to perform advanced picture quality adjustments. This menu should be used by ISF-certified technicians only. ISF Calibration Picture Adjust You must enter a passcode to access the ISF Calibration menu. Note White Balance Blue Enable Baud Rate Picture Adjust: The controls in this menu are identical to those in the main Picture Adjust menu, but are accessible only by entering the ISF Calibration menu passcode.
Operation White Balance: To remove any trace of color from the white areas of the projected image, choose White Balance from the Picture Adjust menu and press ENTER. • Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A good way to do this is to use a test pattern consisting mostly of solid white areas, such as an 80 IRE “window” pattern. If the white areas contain traces of red, green or blue, decrease the Gain for that color.
Operation To use PIP, press the PIP ( 4.5 Using Picture-In-Picture (PIP) ) button. ASPECT SIZE POSITION PIP S.SWAP SWAP TV/AV TIMER OFF EL IM IN A R Y The PIP window appears inside the main image window. 2. Press the ( Press PIP again to switch to side-by-side PIP mode. PR Press PIP again to turn PIP off.
Operation Press the TV/AV button ( ) to select a PIP signal source. For each source, Table 4-3 shows which of the other sources are available as a PIP source. Table 4-3.
Operation Changing the PIP ➤ Position To change the PIP window position, press the POSITION ( ) button on the remote control repeatedly until the window is in the desired position. ASPECT SIZE POSITION PIP S.SWAP SWAP TV/AV TIMER OFF 4 1 Y 2 To change the PIP window size, press the SIZE ( ) button on the remote control repeatedly to achieve the desired window size.
Operation To swap the main and PIP images, press the SWAP button on the remote control. ASPECT SIZE POSITION PIP S.SWAP SWAP TV/AV Swapping the Main and PIP Images EL IM IN A R Y TIMER OFF To swap the main and PIP audio programs, press the S.SWAP button on the remote control. ASPECT SIZE POSITION PIP S.
Operation You can select sound options (Mono, Stereo, SAP or Mono+SAP) depending on the broadcast signal by pressing the MTS/SAP button on the remote control. • Choose Stereo for channels that are broadcasting in stereo. HOLD SUB PAGE CANCEL TEXT S.MODE SURRND MTS/SAP MUTE REVEAL SIZE MIX INDEX PREV CHAN FAV CHAN INFO • Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose SAP to listen to the Secondary Audio Program.
5. Maintenance and Troubleshooting Y Table 5-1 provides some general guidelines for troubleshooting problems you may encounter with the Crystal Series LCD Display. If the suggested solutions fail to resolve the problem or if you encounter an issue not described here, please contact your Runco dealer or Runco Technical Support. Symptom The display does not turn on after initial installation. EL IM IN A R Table 5-1.
Maintenance and Troubleshooting Table 5-1. Troubleshooting Chart (continued) Symptom Possible Cause(s) Solution • The Red/Pr, Green/Y or Blue/Pb outputs from the source are connected to the wrong inputs on the Crystal Series LCD Display. • Ensure that the source outputs are connected to the correct Crystal Series LCD Display input. RGB-HD images appear “noisy.” • Clock and Phase settings need adjustment.
6. Serial Communications To interface the Crystal Series LCD Display with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-11. 6.1 RS-232 Connection and Port Configuration EL IM IN A R Y Configure the RS-232 controller or PC serial port as follows: no parity, 8 data bits, 1 stop bit and no flow control.
Serial Communications Table 6-1.
Serial Communications Table 6-1.
Serial Communications Table 6-1.
Serial Communications Table 6-1.
PR EL IM IN A R Y Serial Communications 56 Runco CX-40HD/CX-46HD Owner’s Operating Manual
7. Specifications 7.1 Crystal Series LCD Display Specifications Table 7-1 lists the Crystal Series LCD Display specifications. 1920 x 1080 Screen Size: CX-40HD = 40 in. (diagonal) CX-46HD = 46 in.
Specifications Table 7-1. Crystal Series LCD Display Specifications (continued) Weight: CX-40HD = 63.93 lbs. (29.0 kg) CX-46HD = 76.28 lbs. (34.6 kg) Regulatory Approvals: Complies with FCC, UL Limited Warranty: One (1) year parts and labor from the date of delivery to the end user. PR EL IM IN A R Y Specifications are subject to change without notice.
Specifications Figure 7-1 and Figure 7-2 show the Crystal Series LCD Display dimensions (all dimensions are in inches). EL IM IN A R 38.84 34.91 Y 4.72 Front side view 19.65 Active Area 23.58 Top side view 3.15 1.14 27.88 1.69 Wall Mount Screw 6-M6 Tap PR 3.90 9.84 Right side view 5.42 Cable Access Area 23.62 22.72 Rear side view 7.87 7.87 Figure 7-1. CX-40HD Dimensions Runco CX-40HD/CX-46HD Owner’s Operating Manual 59 7.
Specifications 4.72 40.18 IM 1.69 EL 30.86 3.90 9.84 Wall Mount Screw 6-M6 Tap Right side view PR 26.56 3.15 1.14 Top side view IN A R Y 44.12 Front side view 22.62 Active Area 5.42 Cable Access Area 23.62 22.72 Rear side view 7.87 7.87 Figure 7-2.
Specifications The Crystal Series LCD Display can display video signals from a variety of computer sources via its RGB-HD and HDMI inputs. Table 7-2 lists the signal types that are compatible with the Crystal Series LCD Display, and indicates which of those are VESA standards. Table 7-2. Computer/Video Signal Compatibility Chart Signal Type Mode Vertical Frequency (Hz) Horizontal Frequency (kHz) RGB HDMI 640x350 85 85.00 31.28 √ – VESA 640x400 85 85.00 35.
Specifications PR EL IM IN A R Y Notes: 62 Runco CX-40HD/CX-46HD Owner’s Operating Manual
SERIAL NUM BER RUMA-009805 rev 12-01-06 v1.1 Runco International • 2900 Faber Street • Union City, CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www.runco.
