Specifications

System Overview
D-73d Series Installation/Operation Manual 11
5. ERROR LED (Left-Eye Engine)
Indicates left-eye engine error conditions as follows:
• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may
fix problem
• Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST)
failure).
6. ERROR LED (Right-Eye Engine)
This LED operates identically to the ERROR LED on the left-eye engine.
7. STANDBY LED (Right-Eye Engine)
This LED operates identically to the STANDBY LED on the left-eye engine.
8. RS-232C INPUT (Right-Eye Engine) (9-pin, female D-Sub)
Connect the Sec. Display Control output on the Dimension Digital Controller to
this input.
9. DHD INPUT (Right-Eye Engine)
An HDCP-compliant digital video input for connecting the HDMI Out To Sec.
Display from the Dimension Digital Controller.
10. POWER INPUT (Right-Eye Engine – 100 to 240 VAC)
Connect the right optical engine to power here.
11. CINEWIDE/AUTOSCOPE +12V TRIGGER OUTPUT
Connect the AutoScope anamorphic lens transport (if present) to this output.
2.2
Dimension Digital
Controller
The Dimension Digital Controller provides “left-eye” and “right-eye” video signals and
the OSD menu to the projector. It controls the other D-73d system components in
response to user input via the following interfaces:
• Front-panel keypad
• IR remote control unit
• HDMI CEC messages
• RS-232 serial commands
•Ethernet
Front Panel LayoutFigure 2-4 shows the controls and indicators on the Dimension Digital Controller front
panel; the paragraphs that follow describe them.
Figure 2-4. Dimension Digital Controller Front Panel
r
a
t
i
o
r
a
t
i
o
i
n
p
u
t
standby
m
e
n
u
i
n
p
u
t
e
n
t
e
r
HDMI 1
16:9/1 1080i/60
3
1
91011
654 87
2
D-73d