Owner's Manual

Random Access Adjustment Mode
6-17
Vertical Corners
To make a coarse adjustment of the red or blue horizontal lines in zone
10, 14, 18, and 22 simultaneously, highlight 'Vertical Corners' and
press ENTER to start the adjustment.
Select with or
then <ENTER>
<EXIT> to return.
COARSE CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return
HORIZONTAL SIDES
VERTICAL CORNERS
Hint :
- Adjust until the red or the blue horizontal lines are on the green lines
or as close as possible to the green lines.
- During these adjustments, the horizontal convergence adjustments in
zones 10 to 25 will be set to midposition (barscale 50).
Fine Convergence Adjustment
Use these controls after the Coarse Convergence Adjustments to
optimize the convergence of the red and blue image on the green image.
Use the control disk to make horizontal or vertical convergence adjust-
ments in the selected zone and then press ENTER to move the box to
another zone or EXIT to return to the Convergence Menu. ENTER
toggles arrow keys between zone selection and zone adjustment .
EXIT returns to Convergence Menu.
Highlight first 'Green Only' when available with the control disk and
press ENTER to display the Convergence Adjustment Menu. Continue
with red on green and blue on green.
Select with or
then <ENTER>
<EXIT> to return.
CONVERGENCE
Select with or
then <ENTER>
<EXIT> to return.
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
CONVERGENCE
SEL : select area
using
arrow keys
ADJ : adjust area
using
arrow keys
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
CONVERGE
ADJUSTMENT
70