Owner's Manual

Service Mode
7-1
ADJUSTMENT MODE
Select with or
then <ENTER>
<EXIT> to return.
Select a path from
below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
EYE-Q
source 1
Starting up the Service Mode
Use the control disk to highlight 'Service' and then press ENTER.
Some items in the Service Mode are password protected (when the
password function is active). Enter your password to continue. All other
password protected items will now also be available if you stay in the
Adjustment Mode.
ENTER continues to the Service Mode Main Menu.
EXIT returns to the Operational Mode.
The service items are combined in two service menus. To switch from
the first to the second menu or vice versa, push the control disk up or
down to select 'More...'
Select with or
then <ENTER>
<EXIT> to return
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
7
SERVICE MODE
Select with or
then <ENTER>
<EXIT> to return
SERVICE MODE
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MORE...
Overview Flowchart 'Service' Mode
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
G2 ADJUSTMENT
GAMMA CORRECTIONS
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
SERVICE MODE
MEMORY BANKS