Owner's Manual

Table of Contents
i-2
Service Mode.....................................................................................................................................................................................7-1
Starting up the Service mode ....................................................................................................................................................7-1
Overview flowchart 'Service' mode ............................................................................................................................................7-1
Identification ...............................................................................................................................................................................7-2
Copy a Block ..............................................................................................................................................................................7-2
Deletion of Blocks ......................................................................................................................................................................7-3
Deleting Block by Block .............................................................................................................................................................7-3
Deletion of All Blocks .................................................................................................................................................................7-3
Change Password .....................................................................................................................................................................7-4
Change Language .....................................................................................................................................................................7-4
Run Time ...................................................................................................................................................................................7-4
Set to Midposition ......................................................................................................................................................................7-5
Undo Midposition .......................................................................................................................................................................7-5
Convergence Mid .......................................................................................................................................................................7-5
Undo Convergence Mid (position) .............................................................................................................................................7-5
Dynamic Astigmatism (spot shape adjustment).........................................................................................................................7-6
G2 Adjust ...................................................................................................................................................................................7-7
Gamma Corrections ...................................................................................................................................................................7-7
CRT Run in Cycle ......................................................................................................................................................................7-7
Projector Warm Up ....................................................................................................................................................................7-8
CRT Drive Mode ........................................................................................................................................................................7-8
Memory Banks ...........................................................................................................................................................................7-9
Messages, Warnings, and Failures .................................................................................................................................................8-1
Specifications ...................................................................................................................................................................................9-1