Owner's Manual

Service Mode
7-4
Change Password
This item is password protected. Highlight 'Change Password' with
the control disk and press ENTER.
The current password is displayed. The new password must consist
of 4 digits between 0 and 9. Push the control disk to the left or to the
right to select the digits to be changed. Use the numeric keys to enter
the new digits.
Press ENTER to save the new password. Before saving the new
password, a confirmation screen will be displayed. Press EXIT to
return to the Service Menu without saving the new password.
When the displayed password is correct, press ENTER to save.
If it is not correct, press EXIT to cancel the saving.
Change Language
The 'Change Language' function offers the possibility to change the
language of the screen menus to:
- English
- Spanish
- French
- German
Push the control disk up or down to highlight 'Change Language' and
press ENTER to select the language menu. Push the control disk up
or down to select the desired language and press ENTER to change
the language.
Run Time
Highlight 'Run Time' with the control disk and press ENTER to display
the amount of time the projector has played since its first start up at the
factory.
Note: all projectors leave the factory after a burn-in period of approxi-
mately 100 hours.
Press EXIT to return the Service Mode Menu.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
RUN TIME
105 h
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
Select new language
with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
Use and to select,
and reprogram
with numeric keys.
<ENTER> to confirm
<EXIT> to return
PASSWORD
Enter new password :
0 0 0 0
Password will be
reprogrammed as xxxx
<ENTER> to confirm
<EXIT> to cancel
CHANGE PASSWORD
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
DYNAMIC ASTIGMATISM
MORE...