User manual
Table Of Contents
- THREE YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Connections to the PlasmaWall and DHD Controller
- 4. Operation
- 4.1 Turning on the Power
- 4.2 Selecting the Input Source
- 4.3 Setting the Computer Display Properties
- 4.4 Using the On-Screen Menus
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
- Appendix A. PlasmaWall Service Remote Control
![](/manual/runco/flat-panel-television-sp-42dhd-sp-42dhdxa/user-manual-english/images/img-79.png)
PlasmaWall Service Remote Control
A-4 PlasmaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
MPEG Filter Use the MPEG Filter to reduce or eliminate so-called “mosquito noise” in
MPEG-compressed video signals (digital broadcasts or DVDs). Set it to LOW, MIDDLE or
HIGH, as needed to minimize distortion around the edges of moving objects, moving
artifacts around edges and/or blotchy noise patterns superimposed over the objects.
To change the MPEG Filter setting on INPUT 1:
1. Press 1 to switch to PlasmaWall INPUT 1.
2. Press MENU on the PlasmaWall Service Remote Control.
3. Press or to select SETUP.
4. Press to select MPEG FILTER, then press SET.
5. Press or to select the desired amount of filtering (OFF, LOW, MIDDLE or HIGH).
6. Press SET to confirm your selection.
➤