User manual

Controls and Functions

8 Runco LS-1 Installation/Operation Manual

PRE

IMINAR

1. RUNCO LOGO BADGE

Remove to access the lens shift

controls.

2. REAR COVER

Remove to access connectors.

3. LAMP MODULE COVER

Remove this cover to access the lamp compartment.

4. CABLE OPENING

Pass cables through this opening.

5. CEILING MOUNT HOLES

Use these to attach the ceiling bracket to the projector. Use M4 screws with a

maximum screw depth of 10

mm (0.39 inch).

6. ADJUSTABLE FEET

Use these when the projector is installed in a table-top configuration to level the image

and/or adjust the projection angle.

7. PROJECTION LENS

The inside of the lens barrel is threaded to accommodate a standard, 72-mm lens

filter. For example, with a smaller screen you can install a neutral-density filter to

reduce the overall light output.

Vertical Lens Shift