User manual

Controls and Functions
10 Runco LS-1 Installation/Operation Manual
PRE
L
IMINAR
Y
6. S-VIDEO
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
7. IR INPUT
Wired input from a Niles- or Xantech-compatible, infrared (IR) repeater system.
8. TRIGGER 1
Provides 12 (+/- 1.5) volt switched output for screen relays with 250mA current
capacity and short protection.
9. RS-232
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
2.3
LS-1 Remote Control
1. ON
Use this button to turn
the projector on.
2. OFF
Use this button to turn
the projector off.
3. Source Selection
Buttons (1-5):
Press to select a video
source. By default, these
buttons are assigned as
follows:
1 = HDMI 1; 2 = HDMI 2;
3 = Component;
4 = S-Video; 5 = Video.
However, you can assign
each button to any
source you wish.
4. Cursor Keys
( , , , )
Use these buttons to
select items or settings,
adjust settings or switch
display patterns.
ENTER
Press to select a
highlighted menu item or
confirm a changed
setting.
ON
l
POW ER OFF
1
4
2 3
5
M1
GAM M A
PIP
M2
OS
SW A P
M3
SHARP
NR
LIGH T
▲
▼
▲ ▼
ENTER
MENU
USER MEMORY
SOURCE
9
1
4
2
3
5
7
6
8
10