User manual

Installation

Runco LS-1 Installation/Operation Manual 15

PRE

IMINAR

3.2

Quick Setup

Table 3-1 gives a quick overview of the LS-1 installation process. The sections following

this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure

For Details, Refer

to page...

Choose a location for the projector 16

Install anamorphic lens mounting assembly (optional) 21

Mount the projector 27

Connect signal sources to the LS-1 30

Connect external controller to RS-232 port and/or IR repeater

system (optional)

Connect 12-volt trigger output to retractable screen or other,

+12V trigger-activated equipment (optional)

Apply power to the projector 37

Primary lens adjustments: projected image size (zoom), position

(shift) and focus

19, 38

Change the OSD Language (optional) 39

For rear-screen and/or ceiling-mount installations, select the

proper picture orientation

Install and adjust secondary anamorphic lens (optional) 40

Projector calibration: adjust the following for each input; save

settings when finished:

• Aspect ratio

•Brightness

•Contrast

• Color level

•Tint

• Input position

Note