User manual

Installation

40 Runco LS-1 Installation/Operation Manual

PRE

IMINAR

3.11

Installing and

Adjusting the

Anamorphic Lens

If you are installing an LS-1 with an anamorphic lens, proceed as follows to install and

adjust that lens.

Fixed Anamorphic Lens The fixed anamorphic lens mount kit consists of everything shown in Figure 3-16. Some

components shipped with your projector may differ slightly from what is shown in these

instructions.

Figure 3-16. Anamorphic Lens Mounting Assembly - Exploded View

It is extremely important that the primary lens is properly

adjusted before you install the anamorphic lens. Ensure that

the image from the primary lens is perfectly centered on the

screen.

Note

➤

3 Height/Pitch Adjustment

Screw, 4-40 x 1/4" (4x)

4 Swell

Latch

Assembly

(2x)

1 Anamorphic Lens

2 Washer (4x)

6 Anamorphic Lens

Base Plate

5 Anamorphic Lens

Mounting Bracket