International Home Theater System User Manual

Installation
26 Runco LS-7 Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting 12-Volt
Trigger Output to External
Theater Equipment
If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, connect it to the 12-volt trigger output(s) as shown in
Figure
3-12.
Figure 3-12. 12-Volt Trigger Output Connection
Connecting an External IR
Receiver
If infrared signals from the remote control cannot reach the projector due to excessive
distance or obstructions such as walls or cabinet doors, you can connect an external IR
repeater system to the IR INPUT on the LS-7 to extend the range of the remote control.
See
Figure 3-13.
Figure 3-13. External IR Receiver Connection
➤
Tip = +12V
Sleeve = Ground
Retractable Screen or other
12-volt trigger-activated
device
➤
ON
l
POWER OFF
1
4
2
3
5
M1
GAMMA
PIP
M2
OS
SWAP
M3
SHARP
NR
LIGHT
▲
▼
▲
▼
ENTER
MENU
USER MEM ORY
SOURCE
(3.5-mm, mini
phono plug)
IR Sensor
IR Repeater
Remote Control