User manual

Installation

Runco CL-410 and CL-420 Owner’s Operating Manual 13

3.2

Quick Setup

Table 3-1 gives a quick overview of the CL-410/CL-420 installation process. The sections

following this one provide detailed instructions.

Installation should be performed by a qualified custom video

installation specialist.

Table 3-1. Installation Overview

Step Procedure

For Details, refer to

page...

1 Choose a location for the projector 14

2 Connect signal sources to the projector 20

3 Connect external controller to RS-232 port (optional) 25

4 Apply power to the projector 27

5 For rear-screen and/or ceiling-mount installations, select

the proper picture orientation

6 Lens adjustments: projected image size (zoom), position

(shift) and focus

16, 29

7 Projector calibration: adjust the following for each input,

starting with Component SD; save settings when finished:

• Aspect ratio

• Brightness

• Contrast

• Color level

• Tint

• Input position

32 through 41

Note