User manual

Operation
34 Runco CL-410 and CL-420 Owner’s Operating Manual
Picture Adjust Use the controls in the Picture Adjust menu to calibrate your CL-410/CL-420 for optimum
picture quality.
The CL-410/CL-420 has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately. Runco recommends calibrating the CL-410/CL-420 inputs in the following
order:
1. Component 1 / Component 2
2. S-Video
3. Video
4. RGB-HD
5. HDMI
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Runco recommends using the following calibration tools for best
results:
• External test pattern source -- Ovation Multimedia, Digital Video Essentials or AVIA test
DVD or equivalent.
• A blue filter (provided with many test DVDs), for color level and tint adjustments.
Virtual Cinema V-CINE A 2.35 image is stretched
anamorphically in both
directions to fill a 16:9
image.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
2.35:1 Image on
16:9 Screen
2.35:1 Image on
16:9 Screen with
Virtual Cinema
Picture Adjust
Brightness 0
Contrast 0
Color 0
Tint 0
Sharpness 3
Gamma 2.2
Color Temp 6500K
ICC Select Standard
White Balance
Save Settings
Restore Picture Settings
➤
When you change a picture quality setting, save the change to a
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input and resolution separately.) For information about saving
settings, refer to
Installation on page 42.
Note