User manual

Operation
36 Runco CL-410 and CL-420 Owner’s Operating Manual
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the
one shown in
Figure 4-6.
Figure 4-6. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast from the Picture Adjust menu. Using the left- and right-arrow ( )
buttons, adjust the contrast to a point just below which the white rectangle starts to
increase in size.
Color Saturation: On your external test pattern source, select a color bar pattern like the
one shown in
Figure 4-7.
Figure 4-7. Typical Color Bar Pattern for Adjusting Color Saturation and Tint
Brightness and contrast controls are interactive. A change to one
may require a subtle change to the other in order to achieve the
optimum setting.
Note
gray
yellow
cyan
green
magenta
red
blue