User manual

Serial Communications
54 Runco CL-410 and CL-420 Owner’s Operating Manual
RRD00 Selects the ANAMORPHIC (16:9) aspect ratio RRDOK
RRD01 Selects the STANDARD (4:3) aspect ratio RRDOK
RRD02 Selects the LETTERBOX aspect ratio RRDOK
RRD03 Selects the VIRTUALWIDE aspect ratio RRDOK
RRD04 Selects the CINEMA (2.35:1) aspect ratio RRDOK
RRD05 Selects the VIRTUAL CINEMA aspect ratio RRDOK
RRE00 Turns the projector OFF RREOK
PON Turns the projector ON Random (Note 2)
Table 6-1. Serial Commands (continued)
Command Description Reply
Notes:
1. All image quality settings must be made with the remote control. After the image adjustments
are complete, you can use these commands to store the settings in the selected memory.
2. The power on command (PON) will not provide an OK reply; it will instead reply with a random
character. For your automation system, simply ensure that you receive a character after the
PON command. If you do not get any reply after PON, send PON again.