User manual

Runco CL-410 and CL-420 Owner’s Operating Manual 55
7.1
CL-410/CL-420
Specifications
Table 7-1 lists the CL-410/CL-420 specifications.
7. Specifications
Table 7-1. CL-410/CL-420 Specifications
Projector Type: Digital Light Processing (DLP), single-chip SuperOnyx™
DMD
Native Resolution: CL-410: 1024 x 576 (16:9)
CL-420: 1280 x 720 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualWide, Cinema,
Virtual Cinema
Video Standards: NTSC, PAL, SECAM
Scan Frequency: Horizontal: 15 - 80 kHz
Vertical: 43 - 100 Hz
Picture Size (16:9 Screen): Recommended Width: 72 to 120 in.
Maximum Width: 150 in.
Throw Distance
(Factor x Screen Width):
CL-410
Minimum: Screen Width x 1.37
Maximum: Screen Width x 1.67
CL-420
Minimum: Screen Width x 1.40
Maximum: Screen Width x 1.70
Horizontal Offset: 8% of screen width left or right
Vertical Offset – CL-410: Ceiling-mounted --
60% of screen height below;
40% of screen height above
Floor-mounted --
40% of screen height below;
60% of screen height above
Vertical Offset – CL-420: Ceiling-mounted --
63% of screen height below;
46% of screen height above
Floor-mounted --
46% of screen height below;
63% of screen height above
Lamp: 250 Watts
Estimated Lamp Life: 2000 hours
Source Inputs: (1) Composite; (1) S-Video; (2) RCA Component (YPbPr);
(1) VGA; (1) HDMI 1.2 with HDCP
Control Options: - Discrete infrared remote
- Serial commands via RS-232
RS-232 Communication
Parameters:
9600 bps, no parity, 8 data bits, 1 stop bit, no flow control