- RUNCO International OWNER'S OPERATING MANUAL 1080p Digital Light ProcessingTM Projector and Digital High Definition (DHDTM) Controller VX-44d, VX-55d
Table Of Contents
- TWO YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Projection Lens
- 3.5 Installing the Optional CineWide Lens Mount
- 3.6 Mounting the VX-44d/-55d
- 3.7 Connections to the VX-44d/-55d and DHD Controller
- Connector Panel Access
- Connecting the DHD Controller to the VX-44d/-55d
- Connecting Source Components to the DHD Controller
- RS-232 Controller Connection
- Connecting 12-Volt Trigger Outputs to External Theater Equipment
- Connecting an External IR Receiver to the DHD Controller
- Connecting to AC Power
- 3.8 Turning on the Power
- 3.9 Adjusting the Picture Orientation
- 3.10 Primary Lens Adjustments
- 3.11 Installing and Adjusting the CineWide Anamorphic Lens
- 3.12 Calibrating Projector Input 2 (DVI)
- 3.13 Working With the Lamp
- 4. Operation
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
Serial Communications
Runco VX-44d/-55d Owner’s Operating Manual 93
PRE
L
IMINAR
Y
Miscellaneous Commands
BKGND -100/100 YES Sets the background color for letterbox or
4:3 aspect ratio (-100 = black; 100 = white)
BKGND? NA NA Returns background setting value
DATE? NA NA Returns product manufacture date
DISPLAY? NA NA Returns display device input source value
HDINPUTRES NA YES Sets YPbPr input resolution and refresh
rate for HD1/HD2, as follows:
0 = 480i
1 = 480p
2 = 576i
3 = 576p
4 = 720p / 60 Hz
5 = 1080i / 60 Hz
6 = 720p / 50 Hz
7 = 1080i / 25 Hz
Any other value = Auto
HDMI1080IBYPASS 0/1 YES Sets Digital (1080i) Bypass off (0) or on (1)
HWVER? NA NA Returns hardware version number
INRES? NA NA Returns input resolution
LENS1? NA NA Returns Lens 1 configuration
LENS2? NA NA Returns Lens 2 configuration
OUTRES 0/5 YES Sets output resolution, as follows:
0 = 480i
1 = 576i
2 = 480p
3 = 576p
4 = 720p
5 = 1080i
OUTRES? NA NA Returns output resolution
SWVER? NA NA Returns software version number
TRIGGER 1/3 YES Assigns trigger to currently-selected aspect
ratio
Table 6-1. Serial Commands (continued)
Command
Parameter
(min/max)
Value
Stored?
Description