- RUNCO International OWNER'S OPERATING MANUAL 1080p Digital Light ProcessingTM Projector and Digital High Definition (DHDTM) Controller VX-44d, VX-55d
Table Of Contents
- TWO YEAR LIMITED WARRANTY
- Safety Precautions
- 1. Introduction
- 2. Controls and Functions
- 3. Installation
- 3.1 Remote Control
- 3.2 Quick Setup
- 3.3 Installation Considerations
- 3.4 Installing the Projection Lens
- 3.5 Installing the Optional CineWide Lens Mount
- 3.6 Mounting the VX-44d/-55d
- 3.7 Connections to the VX-44d/-55d and DHD Controller
- Connector Panel Access
- Connecting the DHD Controller to the VX-44d/-55d
- Connecting Source Components to the DHD Controller
- RS-232 Controller Connection
- Connecting 12-Volt Trigger Outputs to External Theater Equipment
- Connecting an External IR Receiver to the DHD Controller
- Connecting to AC Power
- 3.8 Turning on the Power
- 3.9 Adjusting the Picture Orientation
- 3.10 Primary Lens Adjustments
- 3.11 Installing and Adjusting the CineWide Anamorphic Lens
- 3.12 Calibrating Projector Input 2 (DVI)
- 3.13 Working With the Lamp
- 4. Operation
- 5. Maintenance and Troubleshooting
- 6. Serial Communications
- 7. Specifications
Controls and Functions
Runco VX-44d/-55d Owner’s Operating Manual 9
PRE
L
IMINAR
Y
9. Menu Navigation Buttons:
UP BUTTON ( )
Used to move the menu cursor up in the VX-44d/-55d menu system.
LEFT BUTTON ( )
Used to move the menu cursor left in the VX-44d/-55d menu system.
DOWN BUTTON ( )
Used to move the menu cursor down in the VX-44d/-55d menu system.
RIGHT BUTTON ( )
Used to move the menu cursor right in the VX-44d/-55d menu system.
ENTER BUTTON
When an item is highlighted on the On-Screen Display, the ENTER button selects the
item.
10. INPUT 2 (DVI)
Press this button to select projector Input 2 (HDMI output from the DHD Controller).
11. HELP
Press HELP to display on-screen help text. Press HELP again (or EXIT) to hide it.
12. EXIT
When in the menu structure, the EXIT button brings the menu back one page or
cancels the current function.