Specifications

Pb Pr Y
Vi
deo
3
IR
RS-232 Control
S-Vi
deo 1
S-Vi
deo 2
HD1
HD2
1
2
Pr
R
Y
G
Pb
B
R
Pr
G
Y
B
Pb
H
V
DVI 1 DVI 2DVI OutH/VVH
Pr
R
Y
G
Pb
B
H
V
TRIGGERS
RS-232 Out
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER
-
SERVICEABLE PARTS INSIDE. REFER SERV
ICING
TO QUALIFIED SERVICE CENTER.
AV
IS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
OUTPUTS
INPUTS
SYSTEM CONTROL INTERFAC
E
Component Video
SDI
Option
Serial No
Video Processor / Controller
Model
Runco International
Union City, CA
Made In US
A
DVI-I IN
(from the DHD Controller
DVI Output to Projector
DVI Input)
DHD Controller Description
Projector
DHD Controller
ANALOG INPUTS:
• Composite Video Input
Composite video is the most common type of signal used, but is also the lowest in
picture quality. Many sources have outputs that are limited to composite video, such
as some VCR’s and camcorders; others such as Laser Disc players actually produce
slightly better results when using composite video.
• S-Video Input
S-video is a better type of signal that can be used, but is MUCH better than composite
video. Using such sources as Satellite receivers, high-quality VCRs and DVD players
(with no component output) will produce a MUCH cleaner and sharper signal.
• Component Input
Component video is the best analog signal that can be used. The most common
sources that use component outputs are DVD players, and it is highly recommended
that component be used when possible. Component video goes one step beyond
S-video in picture quality; chroma (color) information is more resolved and the overall
picture appears more well-defined. (This Component input is for SDTV (480i/576i)
signals only)
• HD1 / HD2
These are High Definition Analog inputs to connect the outputs of high definition
sources such as HD tuners and set top boxes, HD satellite receivers, etc. These inputs
will accept and automatically detect signals as RGB, RGBHV or Component Video
(YPrPb).
DIGITAL
INPUTS:
• DVI 1 / DVI 2
These are High Definition Digital inputs. Runco recommends using these digital inputs
whenever possible. Using the DVI 1 and DVI 2 inputs ensures the highest video quality
because the signal is carried in the digital domain throughout the entire signal path,
from the source, through the DHD and finally into the projector. This maintains maximum
signal purity.
Use these inputs to connect Digital High Definition sources that have a DVI output,
such as HD tuners and set top boxes, satellite receivers, DVD players, etc. You may also
connect computers with a DVI output as well, but accepted VESA standard resolutions
are limited to VGA, SVGA, XGA and SXGA at 60Hz refresh.
Input Connections
RGB Input
(from DHD Controller RGBHV
output to Projector RGBHV)
ComLink
(from the DHD Controller
RJ-11 to Projector RS-232)
15