Specifications

When the MENU button is pressed on either the remote control or the front panel, the

main menu will appear on-screen. An example of the main menu is shown above.

Main Menu

Using the ▲ and ▼ arrow buttons, select the desired item

and press enter.

Input Source

The active source is indicated by an arrow next to the

source, note that in the example to the right, Composite is

the current source.

To select a source via the main menu, press either the up

or down buttons on the remote or front panel and highlight

the desired source, and press ENTER. Otherwise, you may

select a source by pressing either the left or right arrow

buttons (on the remote or front panel) when no menus are

on-screen, or by pressing one of the direct access buttons

on the remote control (recommended).

NOTE: If DVI input is used with HDCP content, RGBHV

output is automatically disabled This is in compliance with

HDCP regulations.

If pass-through is selected, note that no on-screen menus will be displayed since the

signal is simply being 'looped' directly to the output. When pass-through is the selected

source, pressing MENU will not automatically select the last selected input before Pass-

through was selected.

Runco Video

Input Source

Aspect Ratio

Picture

Input Position

ISF Presets

Information

Input Source

Composite

S Video 1

S Video 2

Component SD

HD/RGB 1

HD/RGB 2

DVI 1

DVI 2

HD Pass Thru 1

HD Pass Thru 2

Menu Description and Navigation

Main Menu

Input Source