Specifications

DHD Controller Description
2
3
1
4 5
6
7
8
9
10
1. RUNCO ICON
When the Red light is displayed the unit is in Standby, when Blue light is displayed
the unit is On.
2. POWER BUTTON
Press once to toggle on from Standby mode to On mode, a second time to place
into Standby mode.
For a discreet on or off command, you can use the direct
access buttons on the remote control.
3. IR RECEIVER
Receives the IR commands from the remote.
4. LED DISPLAY
Reads out all relevant status information of the DHD at all times. Can be used
instead of the On Screen Display. Indicates the model number, current source, scan
rate (resolution) and aspect ratio.
5. UP BUTTON
Used to direct select aspect ratios or move the menu cursor up in the
On-Screen Display. When no menus are present on-screen, the
UP button will toggle you through aspect ratios in the following order:
Anamorphic → Standard (4:3) → Letterbox → VirtualWide
6. LEFT BUTTON
Used to select inputs or move the menu cursor left in the On
Screen Display. When no menu is present on-screen, the LEFT
button will toggle you through the different sources, in the order of:
HD Pass Thru 2
→ HD Pass Thru 1 → DVI 2 → DVI 1 → HD/RGB2 →
HD/RGB1 → Component SD → S-Video 2 → S-Video 1 → Composite
7. ENTER BUTTON
When an item is highlighted on the On-Screen Display, the ENTER button will select
the item.
Front Panel
9