User Manual

AFAS operation Manual
22 Runcom Technologies Ltd.
5 Adding CPE to the AFAS
To add a CPE in the AFAS open the “Site administration” page in the
AFAS and Choose CPE as shown in Figure 21 below.
Figure 21: AFAS Site administration page
The AFAS SW will open the “Select CPE” page, on this page click the
“Add cpe” option as shown in figure 22 below.
Figure 22: AFAS Select CPE page
On the “Add cpe” page fill the CPE ID, CPE IP, CPE Latitude and
Longitude, the Connecting Base ID, The CPE antenna Height, MAC ID and save it
as shown in Figure 23 below: