User Manual

AFAS operation Manual
Runcom Technologies Ltd. 5
2.2 Adding new CPE
Installation of new CPE or CPE which has moved from its original
location, the following actions must be done (Please also refer to the CPE-O-
R-WS User and Installation Manual):
1. Register the CPE at the AFAS with the expected location (longitude,
altitude, height of the antenna)
2. Select the requested frequency for the CPE (the BTS frequency which
this CPE is targeted to connect )
3. The AFAS will check the new CPE TVWS channel allocation (the
requested channels) by sending the information to TVWS DB using
Spectrum Bridge client.
4. After receiving the response from the Data Base, AFAS will get a list of
allowed frequencies for that CPE.
5. AFAS will create an allowed list for the CPE taking into consideration also
the available BS in the CPE area, and will update the CPE device.
Figure 3 - Adding a new CPE to the network