User's Manual

CPE-O-R-WS User Manual
14 Runcom Technologies Ltd.
Figure 9: Pole Mount Diagram
Warning! – The CPE should be properly grounded for proper protection against
lightning or power surge!
3.6.3 CPE Connection to the PoE adapter
The outdoor CPE is connected to the PoE over a CAT5 Ethernet cable. User Ethernet are provided via the PoE adapter
too. Prepare the Cable and connect it to the CPE and the second edge to the PoE.
Figure 10: CPE - Ethernet Header
Table 5: PoE Specifications
INTERFACE
FUNCTION
DESCRIPTION
24V DC
Power Input Jack on PoE
adapter
Use 24 V /1A DC Power adapter supplied with the CPE.
Misuse of power may cause damage to the device.
ODU
RJ45 Connector to Outdoor
Unit
The connector carries both 24V power wires (2), Ethernet
wires (4) and phone lines (2). User must use outdoor water
proof CAT5 cable for installation!
LAN
RJ45 Interface to Local
Area Network
Local Area Network interface (RJ45), to connect to
computer, or a hub or switch. 1 or 4 ports can be available
depending on the PoE adapter model
3.6.4 Sequence for Interconnect Cable
Separate the twisted pair wires and align by color code in the order listed in the following: