User's Manual

CPE-O-R-WS User Manual
Runcom Technologies Ltd. 23
4.6 Radio Control
4.6.1 Radio Transmission Enable
The WAN interface is a wireless WiMAX radio interface. The CPE radio link must be enabled, by ticking
the WiMAX connection, to connect to the wireless network and connect the user behind CPE.
Figure 16: WiMAX Radio Control
4.6.2 Radio Signal Transmission
For TVWS CPEs the radio signal is transmitting only from Antenna interface 1. Therefor the WIMAX TX
Mode must be “TX0” and not other options.