User's Manual

Commissioning Procedure PicoPlus Base Station User Manual

10 CONFIDENTIAL Runcom Technologies Ltd.

2.3 Opening a Session to the BS

This section describes the steps required for opening a session to the BS.

The procedure consists of the following steps:

• Physically connecting a computer to the BS.

• Configuring the computer to communicate with the BS.

• (Via the RCMS-BS), configuring the BS to communicate with the computer.

2.3.1 Physical Connection between BS and Computer

Physical connection: Connect the Ethernet port of the computer running the RCMS-BS

application to the BS ETH-1 port using an Ethernet cross-cable.

NOTE: Some computers may have the cross-cable function built in, in which case a standard Ethernet

cable may be used.

2.3.2 Configuring the Computer's IP Address and Disabling Firewall

1. Set the computer IP address fields to match the BS's subnet:

NOTE: The procedure may vary depending on your specific OS.

• In the Network Connections pane, right-click on the Local Area Connection

corresponding to the BS connection.

• Select Properties.

ETH