User's Manual

Installing the PicoPlus BS PicoPlus Base Station User Manual
22 CONFIDENTIAL Runcom Technologies Ltd.
For poles with a diameter of 1.00-1.75”:
• Mount the BS on the pole using the Clamping Bracket as shown above. Assemble
the bracket CONCAVE as shown.
• Tighten the bracket using the provided screws.
• Use a tightening torque of 14N/m to tighten.
3.1.4 Mounting On a Wall
1. Secure the Bracket Base to the BS underside:
• Secure Bracket Base to the underside of the BS, using the provided screws, as
shown below:
• Verify that the orientation of the hole in the BASE is aligned with the elevation axis.
• Use a tightening torque of 5.7N/m to tighten.
CLAMPING BRACKET
Assembled CONCAVE
on the pole
Secure to BS
Underside
BASE