User's Manual

Appendix A: Technical Specifications PicoPlus Base Station User Manual
42 CONFIDENTIAL Runcom Technologies Ltd.
6 Appendix A: Technical
Specifications
The PicoPlus BS installation procedure involves the following accessories:
• RF Antennas
• GPS Antenna (Optional)
• Mounting kit
This section details the specifications for the PicoPlus BS and accessories.
6.1 PicoPlus BS Specifications
Radio
Number of sectors Single sector unit
Frequency 2.3-2.7GHz, 3.3-3.8GHz (other frequencies are optional)
FFT 512, 1024, 2048
FEC Convolution Code and Turbo Code
Channel bandwidth 3.5 MHz, 5 MHz, 7 MHz, 8.75 MHz, 10 MHz, optional 20 MHz
Duplex method TDD, optional FDD/HFDD
Central frequency resolution 125 KHz
Maximum output power (without Antenna) 30 dBm per antenna
Antennas:
Type
Integrated Sectorized 11dbi (120°) / 15dbi (90°) OR External
dual slant antenna
Number 2 dual slant
Connectors 2x N-Type, 50 ohm, lightning protected
Modulation and coding rates
DL/UL: QPSK (1/2, 3/4) , 16 QAM (1/2, 3/4), 64 QAM (2/3 , 3/4,
5/6 )
(64 QAM is optional for UL)
Diversity Supported MIMO A/B , STC, SISO
GPS Integrated
Synchronization Integrated GPS module with on board synchronization unit
IEEE1588 and Backhauling self synchronization are optional
Management
Network Management SNMPv2/v3, standard and proprietary MIB
System Configuration SNMP, FTP, CLI
Software Upgrade Remote TFTP upgrade of firmware and programming