Installation Guide

Specifics
•Swivel pull-down, push-button diverter and 65” braided nylon
flexible hose
•Maximum flow of 6.8L/min (1.8 gpm) at 60 psi
•Brass body; zinc handle, stainless steel spout
•Low-lead (less than 0.25%)
•9/16-24 UNEF connections with flexible stainless steel braided
connectors
•4 AA batteries up to 1-2 years lifespan (not included)
•Functions
•Infrared sensor (with 2.5” - 6.5 cm range) will activate / deactivate
flow with hand movement
•Handspray will automatically be activated when pulled from its
housing
•Manual override possible for regular handle use
•A safety timer will automatically close water after 3 minutes of no
activity
•Standards
Third party certified to IAPMO ASME A112.18.1/CSA B125.1 and
all applicable requirements referenced therein including NSF 61/9G
& 372
•Contains no more than 0.25% weighted average lead content
•Complies with California Energy Commission requirements
•The backflow protection system in the device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow
Installation
•Single-hole / 3-hole installation（Cover plate included）
•Integrated check valve with KliK Connection
Specifications
Close up view of Control Box
Models: RF411003
Single Handle Pull –Down
Kitchen Faucet With dual-
sensor function
CEC