Model :RFBW01012 Model :RFBE 01012 Model :RFBG 01012 Linen Tower Operators’ Manual Manual de Operadora de Linen Tower Inspect product prior to installation. Contact info@runfinegroups.com prior to returning product to retailer. Inspeccione el producto antes de su instalación. Póngase en contacto con info@runfinegroups.com antes de devolver el producto al vendedor.
PARTS LIST A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. P. Q. R. S. T. U.
HARDWARE 1. DOOR/ DRAWER KNOB / PERILLA DE LA PUERTA/CAJÓN 2. DOOR KNOB SCREW (18MM L) / TORNILLO PARA LA PUERTA PERILLA (18MM L) 3. DRAWER KNOB SCREW (35MM L) / TORNILLO PARA LA PUERTA PERILLA (35MM L) 4. CAM LOCK NUT & BOLT / TUERCA & PERNO CAM 5. WOOD DOWEL / TACO DE MADERA 6. DOOR MAGNET AND SCREW / IMÁN Y TORNILLO DE LA PUERTA BLANCA 7. SHELF SUPPORTS // SOPORTA DE ESTANTE 8. WOOD SCREW (12MM L) / TORNILLO DE MADERA (12MM L) 9. PLASTIC ANCHOR & SCREW / ANCLA DE PLÁSTICO & TORNILLO 10.
TOOLS REQUIRED (NOT INCLUDED) / HERRAMIENTAS REQUERIDAS (NO INCLUIDO) DESTORNILLADOR PLANO FLAT HEAD SCREWDRIVER PHILLIPS SCREWDRIVER DESTORNILLADOR PHILLIPS Por favor, lea las instrucciones antes del montaje. Please read instructions before assembly. Perform assembly on a carpeted surface to prevent scratching. Realizar el montaje sobre una superficie enmoquetada para evitar que se raye. This assembly process require at least two people. Este proceso de montaje requiere al menos dos personas.
ASSEMBLY OF THE TOP SIDE PANELS, THE FIXED SHELF & THE BACK TOP CROSS BAR (STEP 1)- #B MONTAJE DE LOS PANELES LATERALES SUPERIORES, EL ESTANTE FIJO & LA VUELTA SUPERIOR LA BARRA TRANSVERSAL (PASO 1)-#B Attach the top side panels (A) &(B) to the fixed shelf panel (E) & the back top cross bar (F) by inserting the camlock bolts(4) and the wood dowels (5) as shown (Figure 2).
ASSEMBLY OF THE TOP PANEL(STEP 2) MONTAJE DEL PANEL SUPERIOR (PASO 2) Screw the door magnet (6) to the top panel (C) using the magnet screw (6). Insert the cam lock bolts (4) into the pre-drilled hole of the top panel (C). Attach the top panel (C) to the top side panels (A) & (B) as shown (Figure 4). Atornille el imán de la puerta (6) en el panel superior (C) utilizando el tornillo imán (6). Inserte los pernos de bloqueo de leva (4) en el orificio pretaladrado del panel superior (C).
ASSEMBLY OF THE LOWER SIDE PANEL, THE LOWER BACK TOP CROSS BAR, THE LOWER FRONT UP CROSS BAR, THE FRONT APRON PANEL, AND THE BOTTOM PANEL (STEP 3)-#A ASAMBLEA DEL PANEL LATERAL INFERIOR, la espalda baja TOP BAR CRUZ, LA BAJA FRENTE ASCENDENTE CRUZ BAR, EL PANEL FRONTAL DELANTAL, y el panel inferior (PASO 3) - # A Push down the plastic part in the middle of the drawer slide, knock down the drawer slides (11) as shown below.
ASSEMBLY OF THE LOWER SIDE PANEL, THE LOWER BACK TOP CROSS BAR, THE LOWER FRONT UP CROSS BAR, THE FRONT APRON PANEL AND THE BOTTOM PANEL (STEP 3)-#B ASAMBLEA DEL PANEL LATERAL INFERIOR, BARRA TRANSCERSAL SUPERIOR POSTERIOR, LA BAJA FRENTE ASCENDENTE CRUZ BAR, EL PANEL FRONTAL DELANTAL Y EL PANEL INDERIOR(PASO 3) - # B Attach the lower left side panel (H) and the lower right side panel (I) to the bottom panel (D), the lower back top cross bar (J), the lower front top cross bar (K) and the front apron panel (
SECURE THE TOP AND LOWER PORTIONS(STEP 4) Asegure la parte superior e inferior (PASO 4) Attach the top portion and leg by inserting the camlock bolts (4) and the wood dowels (5) located on the top side panels and the lower side panels as shown (Figure 9). Sujete la parte superior y la pierna insertando los pernos camlock (4) y los tacos de madera (5) situados en los paneles laterales superiores y los paneles laterales inferiores como se muestra (Figura 9).
ASSEMBLY OF THE BACK PANEL(STEP 5) MONTAJE DEL PANEL POSTERIOR (PASO 5) Attach the back panel ( T )& (U) to the cabinet using the wood dowels (8) as shown (Figure 11). Fije el panel trasero (T) & (U) al mueble utilizando los tacos de madera (8) como se muestra (Figura 11).
ASSEMBLY OF THE DOOR PANEL AND THE DRAWER(STEP 6)-#B ASAMBLEA DEL PANEL DE PUERTA Y EL CAJÓN (PASO 6) - # B Attach the top door panel (M) to the top side panels (A) & (B) using the door hinges and screws (10). Insert the drawer into the cabinet assembly and making sure that drawer is inline with drawer guides on cabinet assembly as shown (Figure 14). Fije el panel superior de la puerta (M) a los paneles laterales superiores (A) y (B) utilizando las bisagras de las puertas y los tornillos (10).
WALL MOUNT INSTALLATION(STEP 7) INSTALACIÓN MONTAJE EN PARED (STEP 7) Locate a desired position on the wall on which to mount the cabinet. If wall studs are located at the exact screw positions of the cabinet cross bars, then mount the cabinet to the wall using mounting screws (9). If the wall behind the cross bars is hollow, then drill through all mounting holes to mark hole positions on the wall. Remove the cabinet from the wall.