Installation Guide

Add Click for Philips Hue to Hue Bridge
1. Access the Hue App for either Apple
iOS or Android Google Play. Update the
App and Bridge (V2 or newer) to latest
firmware version to ensure compatibility.
2. Open the ‘Settings’ page.
3. Click on ‘Accessory setup’.
4. Click on ‘Add accessory’.
5. Select ‘Friends of Hue switch’.
6. Follow the on-screen instructions.
7. For advanced configuration options
such as cycling through multiple scenes
with one button, consider exploring third
party apps such as HueDynamic:
http://bit.ly/HueDynamic
Troubleshooting:
● Can’t find “Friends of Hue” option in
app: Upgrade to latest version
● Click for Hue won’t connect to bridge:
Works only with square V2 bridge or
newer, not with round V1 bridge
● Switch box is recessed: search on
internet for “loose outlet spacers”
● Support available at meethue.com
Instructions for using Single Rocker:
When using the single rocker insert only 2
buttons can be accessed while 4 buttons will
be visible in the software. Note that the
linking operation requires 4 buttons and can
only be done with the dual rocker
configuration. After Click is added to the
bridge, the single rocker insert may be used.
Storing the dual rockers is required for use
in relinking or for contacting Philips for
system support.
1. Remove trim piece by releasing 4
clips on the back of the Click for Hue.
2. Pull off the Dual Rockers.
3. Snap the Single Rocker insert on so
that plungers contact the LEFT side
of the switch.
4. Press trim piece into place ensuring
all 4 clips are secure.
Requires a Philips Hue Bridge (v2) and Philips Hue app for
Android or iOS for initial setup. Learn more on meethue.com
Privacy Notice: Please be informed that Philips Lighting will
have access to your personal and usage data via the Hue
bridge. In order to understand how Philips Lighting processes
your personal data and usage data please read respectively
Philips Lighting’s privacy notice and terms of use which can be
found on meethue.com.
Contains FCC ID: SVZ-PTM215Z
Contains IC: 5713A-PTM215Z
The enclosed device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (i.) this
device may not cause harmful interference and (ii.) this device
must accept any interference received, including interference
that may cause undesired operation.
Philips is a trademark of Koninklijke Philips N.V.
Hue, Friends of Hue, and all related logos are trademarks of
Signify Holding.
Command Brand is a trademark of 3M.
AHD0643F 2